ROS实现共享上网

ÒÔÉÏÊÇ·Ï»°£¬ºÇºÇ

Ç°ÌáÌõ¼þ£ºÒ»Ì¨×°ÓдÓÍø´ó¹«Ë¾¹ºÂòµÄ×°ºÃROSµç×ÓÅ̼°Á½ÕÅÍø¿¨µÄÖ÷»ú£¬Í¨¹ýÏÔʾÆ÷µÇ¼ROS£¨°æ±¾Îª3.30£©

ʵÏÖµÚÒ»²½£º²é¿´Íø¿¨ÐÅÏ¢

½øÈë²Ëµ¥£ºinterface

[admin@MikroTik] /interface> print

Flags: D - dynamic, X - disabled, R - running, S - slave 

#     NAME                                        TYPE             MTU   L2MTU

0  R  ether1                                      ether            1500 

1  R  ether2                                      ether            1500 

´ÓprintÃüÁîÏÔʾµÄÐÅÏ¢À´¿´£¬Á½ÕÅÍø¿¨¶¼Òѱ»ROSÕý³£Ê¶±ð³öÀ´£¬Èç¹ûÏÔʾµÄ¡°X¡±£¬Ôò±íÃ÷Íø¿¨ÊǽûÓÃ״̬£¬È磺

[admin@MikroTik] /interface> print

Flags: D - dynamic, X - disabled, R - running, S - slave 

#     NAME                                        TYPE             MTU   L2MTU

0  X  ether1                                      ether            1500 

1  R  ether2                                      ether            1500 

Íø¿¨¡°ether1¡±´¦ÓÚ½ûÓÃ״̬

¿Éͨ¹ýÃüÁ

[admin@MikroTik] /interface> enable ether1

[admin@MikroTik] /interface> print

Flags: D - dynamic, X - disabled, R - running, S - slave 

#     NAME                                        TYPE             MTU   L2MTU

0  R  ether1                                      ether            1500 

1  R  ether2                                      ether            1500 

É趨¡°ether1¡±ÎªÍâÍøÍø¿¨£¬¡°ether2¡±ÎªÄÚÍøÍø¿¨

[admin@MikroTik] /interface> set ether1 name=wan

[admin@MikroTik] /interface> set ether2 name=lan

[admin@MikroTik] /interface> print

Flags: D - dynamic, X - disabled, R - running, S - slave 

#     NAME                                        TYPE             MTU   L2MTU

0  R  wan                                         ether            1500 

1  R  lan                                         ether            1500 

ʵÏÖµÚ¶þ²½£ºÅäÖÃIPµØÖ·

  1£©Èç¹ûÊǾ߱¸¹Ì¶¨ÍâÍøIPµØַʱ£º

¼Ù¶¨ÍâÍøIPµØַΪ172.16.0.2/28£¬Íø¹ØÊÇ172.168.0.1£¬ÄÚÍøΪ192.168.1.1/24

½ÓÉÏÃ棺

[admin@MikroTik] /interface> /ip address

[admin@MikroTik] /ip address> add address=172.16.0.2/28 interface=wan

[admin@MikroTik] /ip address> add address=192.168.1.1/24 interface=lan

[admin@MikroTik] /ip address> print

Flags: X - disabled, I - invalid, D - dynamic 

#   ADDRESS            NETWORK         BROADCAST       INTERFACE              

0   172.16.0.2/28      172.16.0.0      172.16.0.15     wan                    

1  192.168.1.1/24     192.168.1.0     192.168.1.255   lan     

  2£©Èç¹ûͨ¹ýADSL²¦ºÅ¹²ÏíÉÏÍøʱ£º

¼Ù¶¨ADSLµÄÓû§Ãû£º111ºÍÃÜÂ룺111£¬ÄÚÍø£º192.168.1.1/24

[admin@MikroTik] /interface> pppoe-client

[admin@MikroTik] /interface pppoe-client> add user=111 password=111 interface=wan add-default-route=yes

[admin@MikroTik] /interface pppoe-client> print

Flags: X - disabled, R - running 

0 X  name="pppoe-out1" max-mtu=1480 max-mru=1480 mrru=disabled interface=wan user="111" password="111" profile=default service-name="" ac-name="" add-default-route=yes dial-on-demand=no use-peer-dns=no allow=pap,chap,mschap1,mschap2 

[admin@MikroTik] /interface pppoe-client> /ip address

[admin@MikroTik] /ip address> add address=192.168.1.1/24 interface=lan

[admin@MikroTik] /ip address> print

Flags: X - disabled, I - invalid, D - dynamic 

#   ADDRESS            NETWORK         BROADCAST       INTERFACE              

0   192.168.1.1/24     192.168.1.0     192.168.1.255   lan     

ʵÏÖµÚÈý²½£ºÅäÖÃÍø¹Ø

  1£©¹Ì¶¨IP£º

[admin@MikroTik] /ip address> /ip route

[admin@MikroTik] /ip route> add gateway=172.16.0.1

[admin@MikroTik] /ip route> print

Flags: X - disabled, A - active, D - dynamic, 

C - connect, S - static, r - rip, b - bgp, o - ospf, m - mme, 

B - blackhole, U - unreachable, P - prohibit 

#      DST-ADDRESS        PREF-SRC        G GATEWAY              DISTANCE IN..

0 A S  0.0.0.0/0                          r 172.16.0.1           1        wan 

1 ADC  172.16.0.0/28      172.16.0.2                             0        wan 

2 ADC  192.168.1.0/24     192.168.1.1                            0        lan 

   2£©Èç¹ûÊÇADSL£¬²»ÐèÒªÅäÖã¬ÒòΪÔÚÉÏÃæÅäÖÃIPµØÖ·ÊÇ£¬Ñ¡Ôñ²ÎÊý£ºadd-default-route=yes 

ʵÏÖµÚËIJ½£ºÅäÖÃDNS

[admin@MikroTik] /ip route> /ip dns

[admin@MikroTik] /ip dns> set primary-dns=61.139.2.69 allow-remote-requests=yes

[admin@MikroTik] /ip dns> print

            primary-dns: 61.139.2.69

          secondary-dns: 0.0.0.0

  allow-remote-requests: yes

    max-udp-packet-size: 512

             cache-size: 2048KiB

          cache-max-ttl: 1w

             cache-used: 5KiB

²ÎÊýallow-remote-requests=yes£¬Òâ˼ÊDZ¾µØ·ÓÉÆôÓÃDNS¹¦ÄÜ£¬¼´£ºÔÚÄÚÍø»úÆ÷ÉÏ£¬ÅäÖÃDNSʱ¿ÉÒÔÖ±½ÓʹÓÃÍø¹ØµØÖ·×÷DNS·þÎñÆ÷

ʵÏÖµÚÎå²½£ºÒþ²Ø£¬¹²ÏíÉÏÍø£¨NAT£©

[admin@MikroTik] /ip dns> /ip firewall nat

[admin@MikroTik] /ip firewall nat> add chain=srcnat action=masquerade

[admin@MikroTik] /ip firewall nat> print

Flags: X - disabled, I - invalid, D - dynamic 

0   chain=srcnat action=masquerade 

ÒÔÉÏÎå²½¼´¿ÉÍê³ÉÀûÓÃROSʵÏÖÄÚÍø¶ą̀»úÆ÷¹²ÏíÉÏÍøµÄ¹¦ÄÜ£¬ÔÚºóÐøµÄϵÁÐÖУ¬ÎÒÃÇ»áÔÚ´Ë»ù´¡ÉÏÌí¼ÓÆäËû¹¦ÄÜ£¬ÀûÓÃROSÏÖʵÏÖÆäËûÄ¿±êÃ÷È·µÄ¹¦ÄÜ

¸ßÊÖÇëÆ®¹ý£¬

Èç¹ûÊÇͨ¹ýwinboxÁ¬½Óµ½ROSµÄÓû§£¬ÒÔÉÏËùÓеÄÃüÁ¿ÉÒÔÔÚwinboxÖеÄÖ÷²Ëµ¥Öеģº¡°new terminal¡±Ö±½Ó½øÐÐÕ³Ìù²Ù×÷ʹÓÃ