h3c交换机配置流程

system-view

System View: return to User View with Ctrl+Z.

[H3C]vlan 2 to 2000

Please wait.......................................... Done.

[H3C]interface Vlan-interface 2000

[H3C-Vlan-interface2000]ip address 1.1.1.100 255.255.255.0

[H3C-Vlan-interface2000]dis this

ip address 10.46.100.100 255.255.255.0

[H3C-Vlan-interface2000]quit

2.设置用户名与密码流程

system-view

System View: return to User View with Ctrl+Z.

[H3C]local-user admin

[H3C-luser-manage-admin]password simple h3c123

[H3C-luser-manage-admin]quit

3.设置端口的vlan流程

system-view

System View: return to User View with Ctrl+Z.

[H3C]vlan 100

[H3C-vlan100]port g

[H3C-vlan100]port GigabitEthernet 1/0/1 to g

[H3C-vlan100]port GigabitEthernet 1/0/1 to GigabitEthernet 1/0/20

[H3C-vlan100]quit

4.交换机设置trunk口流程

system-view

System View: return to User View with Ctrl+Z.

[H3C]interface (Etherne或GigabitEthernet） 1/0/9

[H3C-Ethernet1/0/9]p l t

[H3C-2-Ethernet1/0/9]p t p v a

Please wait........................................... Done.

[H3C-2-Ethernet1/0/9]save

The current configuration will be written to the device. Are you sure? [Y/N]:Y

Please input the file name(*.cfg)[flash:/startup.cfg]

(To leave the existing filename unchanged, press the enter key):

flash:/startup.cfg exists, overwrite? [Y/N]:Y

Validating file. Please wait............

5.静态路由流程

system-view

System View: return to User View with Ctrl+Z.

[H3C]ip route-static 0.0.0.0 0.0.0.0 10.46.79.254

[H3C]save

The current configuration will be written to the device. Are you sure? [Y/N]:Y

Please input the file name(*.cfg)[flash:/startup.cfg]

(To leave the existing filename unchanged, press the enter key):

flash:/startup.cfg exists, overwrite? [Y/N]:Y

Validating file. Please wait...

6.远程访问telnet流程。

system-view

System View: return to User View with Ctrl+Z.

[H3C]local-user admin

[H3C-luser-manage-admin]authorization-attribute level 3

[H3C-luser-manage-admin]service-type telnet

[H3C]telnet server enable

[H3C]user-interface vty 0 4

[H3C]authentication-mode scheme

7.设置端口名称

system-view

System View: return to User View with Ctrl+Z.

[H3C]interface Ethernet 1/0/1

[H3C-GigabitEthernet1/0/1]description 端口

[H3C-GigabitEthernet1/0/1]dis th

interface GigabitEthernet1/0/1

port link-mode bridge

description 端口

combo enable fiber

8.交换机某个端口添加VLAN###

system-view

System View: return to User View with Ctrl+Z.

[H3C]interface GigabitEthernet 1/0/1

[H3C-GigabitEthernet1/0/1]port access vlan###

[H3C-GigabitEthernet1/0/1]quit