FANS AND BLOWERS DATE: ___________________________
BY:______________ CHK’D____________
JOB NO. ____________________________
CUSTOMER_______________________________ SITE________________________________________________
ITEM NO._________________________ SERVICE_________________________ JOB NO.___________________
NO. REQUIRED___________________ MOLECULAR WEIGHT____________ CORROSIVES PRESENT______
| □ DATA BY VENDOR | ○ DATA BY VENDOR | |||||||
| □ OPERATING CONDITIONS □CAPACITY (NM3 /MIN)(KG/HR) □SPECIFIC GRAVITY(AIR = 1) □BAROMETER(KG/CM2A) □ELEV. ABOVE SEA LEVEL(M) □RELATIVE HUMIDITY(%) □TEMPERATURE INLET(℃) □PRESS. INLET(KG/CM2 A)(MMH2O)G □PRESSURE DIFFERENTIAL □PRESS. OUTLET(KG/CM2A)(MMH2O)G ○SPEED(RPM) ○WHEEL TIP VELOCITY(/MIN.) ○METRIC BHP(INCLUDE. LOSSES) ○ WATER RATE(KGxMETRICHPxHR) | □TYPE FAN: (CENTRIFUGAL)(VANEAXIAL)(ROTARY) (TUBE AXIAL) (PROPELLER) (OTHER) ○ TYPE BLADES: (BACKWARD CURVED)(RADIAL) (FORWARD CURVED)(LOBE) | |||||||
| ○CONSTRUCTION DETAILS: DESCRIPTION(SISW)(DIDW) CLASS(І)(Џ)(Ш)(IV) ARRANGEMENT(1)(2)(3)(4)(5)(6)(7)(8)(9) MOTOR LOCATION(W)(X)(Y)(Z) ○WHEEL:(CAST)(FORGED)(RIVETED) DIA. _____________ MMVANE THICKNESS______________ MM ○SHAFT:DIA. AT WHEEL_______MM DIA. AT BRGS. ______ MM SPAN________________ MM OVERHANG________________ MM ○BEARINGS:(INTERNAL)(EXTERNAL) RADIAL(ANTIFRICTION)(ROLLER)(SLEEVE) THRUST________________________________________________ ○SEALS:_________________________________________________ ○ROTATION FACING COUPLING (CW)(CCW) | ||||||||
| ○ MAX. CAP. (M3/MIN.@INLET)___________________ MAX. METRIC BHP________________ ○ SURGE PT. (M3/MIN.@INLET)___________________ MAX. CONT.SPEEC________________ ○ FAN: 1ST CRITICAL_____________________________ 2ND CRITICAL____________________ □CONTROL: OUTLET DAMPERS(STD.)(STREAM FLOW) VARIABLE INLET VALVES(MANUAL)(AUTO) VARIABLE SPEED DRIVE(YES)(NO) SLIP RING MOTOR(YES)(NO) OTHER__________________________________________________________________________ □CONTROL POWER:_______________VOLTS__________________PH_________________ CPS ELECT. EQUIP. HAZARD CLASS____________________________________________________ | ||||||||
| ○ MATERIALS OF CONSTRUCTION HOUSING_______________________________________________ BLADES________________________________________________ BLADE TIPS_____________________________________________ GUIDE VANES___________________________________________ SHAFT_________________________________________________ SHAFT SLEEVES________________________________________ OTHER_________________________________________________ | ||||||||
| □DRIVER:(MOTOR)(TURBINE) □MAKE_________________________________________ □ TYPE_________________________ ○ RATED METRIC HP____________________ ○ RPM___________________________________ ○ WEIGHT_______________________________________ | ||||||||
| ○ CONNECTIONS | SIZE | RATING | ORIENTATION | |||||
| INLET OUTLET DRAINS | ||||||||
| □COUPLING(YES)(NO) □MAKE_________________________________________ □ TYPE_________________________ ○ MODEL________________________________________ | ||||||||
| □BELT DRIVE(YES)(NO) ○RULLEY SIZE__________________________________ ○ WEIGHT______________________ □GUARD REQUIRED(STD)(CODE) □STATIC CONDUCTING(YES)(NO) □OTHER___________________________________________________________________________ | □TESTS MECHANICAL RUN IN (YES)(NO) WITNESSED PERFORMANCE (YES)(NO) NON-WITNESSED PERFORMANCE (YES)(NO) SHOP INSPECTION (YES)(NO) OTHER_________________________________________________________ | |||||||
| ○ FAN OR BLOWER WEIGHT_________________________________________________________ | ||||||||
| ITEMS TO BE INCLUDED BY VENDOR: □ COMMON BASEPLATE □ CONTROL PANEL □ PERFORMANCE CURVE □ SECTIONAL DWG. □ OUTLINE DWG. □ INLET FILTER □ SILENCER(INLET)(OUTLET) | □ □ DUCTING TRANSITION PIECE □ VIBRATION ISOLATION ○ INERTIA BLOCKS ○ RAILS □ SPECIAL COATINGS □ COUPLING GUARD(STD.) □ PAINNT (PRIMER)(MRG. STD.) | □ INLET SCREEN □ CONDENSATE DRAIN □ SPARK RESISTANT CONSTRUCTION □ INSULATION STUDS □ INSPECTION ACCESS ○ HEAT SHIELDS ○ BEARING COOLING WHEELS | ||||||
| NORMAL CONDITIONS:DRY AT@ 0℃ AND 760 MM HG. | ||||||||
| REMARKS:______________________________________________________________________________________________________________________________________________________ ________________________________________________________________________________________________________________________________________________________________ ________________________________________________________________________________________________________________________________________________________________ ________________________________________________________________________________________________________________________________________________________________ | ||||||||
FANS AND BLOWERS DATE: ___________________________
BY:______________ CHK’D____________
JOB NO. ____________________________
| OPERATING CONDITIONS.CONTD | ||||||||||||
| GAS ANALYSIS ○ MOL% ○____________ | NORMAL | RATED | OTHER CONDITIONS | REMARKS | ||||||||
| A | B | C | D | |||||||||
| AIR | MW | |||||||||||
| OXYGEN | 28,966 | |||||||||||
| NITROGEN | 32,000 | |||||||||||
| WATERVAPOR | 28,016 | |||||||||||
| CARBON MONOXIDE | 18,016 | |||||||||||
| CARBON DIOXIDE | 28,010 | |||||||||||
| HYDROGEN SULFIDE | 44,010 | |||||||||||
| HYDROGEN | 34,076 | |||||||||||
| METHANE | 2,016 | |||||||||||
| ETHYLENE | 16,012 | |||||||||||
| ETHANE | 28,062 | |||||||||||
| PROPYLENE | 30,068 | |||||||||||
| PROPANE | 42,078 | |||||||||||
| i-BUTANE | 44,094 | |||||||||||
| n-BUTANE | 53,120 | |||||||||||
| i-PENTANE | 72,146 | |||||||||||
| n-PENTANE | 72,146 | |||||||||||
| HEXANE PLUS | ||||||||||||
| TOTAL | ||||||||||||
| AVG. MOL WT. | ||||||||||||
| LOCATION: | NOISE SPECIFICATIONS: | |||||||||||
| ○ INDOOR ○ DUTDOOR ○ GRADE | ○ HEATED ○ UNHEATED ○ MEZZANINE | ○ UNDER ROOF ○ PARTIAL SIDES ○ _______________ | ○ APPLICABLE TO MACHINE: SEE SPECIFICATION_______________________________________________________ ○ APPLICABLE TO NEIGHBORHOOD: SEE SPECIFICATION_______________________________________________________ ACOUSTIC HOUSING: ○ YES ○ NO | |||||||||
| ○ ELECTRICAL AREA CLASS_________ GR. _________ DIV. _________ ○ WINTERIZATION REQD. ○ TROPICALIZATION REQD. | ||||||||||||
| SITE DATA: | APPLICABLE SPECIFICATIONS: ____________________________________________________________________________ ____________________________________________________________________________ ____________________________________________________________________________ ____________________________________________________________________________ | |||||||||||
| ○ELEVATION____________________BAROMETER___________KG/CM2A ○ RANGE OF AMBIENT TEMPS: | ||||||||||||
SITE RATED ℃ NORMAL ℃ MAXIMUM ℃ MINIMUM ℃
| DRY BULB __________ __________ __________ __________ __________ | WET BULB __________ __________ __________ __________ __________ | ||||||||||
| UNUSUAL CONDITIONS: ○ DUST ○ FUMES | PAINTING: | |||||||||||
| ○ OTHER _________________________________________________________ _____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ | ○ MANUFACTURER’S STD. ○ OTHERS_________________________________________________________________ | |||||||||||
| SHIPMENT: | ||||||||||||
| ○ DOMESTIC ○ EXPORT ○ EXPORT BOXING REQD. ○ DUTDOOR STORAGE MORE THAN 3 MONTHS | ||||||||||||
| REMARKS:______________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ | ||||||||||||
MOTOR DATA SHEET DATE__________REV. ________
TO MANUFACTURER SHEET NO.________OF_________
| Project No. | For: FAN or BLOWER |
| Motor No. | |
| 1. Rating | ________HP/KW, ________V, ________ Ph., ________Hz, |
| Service Conditions | |
| 2. Duty | ■ Continuous □ Short Time □ Periodic |
| 3. Location | □ Indoor ■ Outdoor |
| 4. Environment | |
| 5. Hazardous Area Classification | ■ Hazardous Cl___1___ Div. ___1____ Gr. __D___ □ Non-hazardous |
| 6. Ambient Temperature | Max. 40 ℃, Min. 5 ℃, Avg. 30 ℃ |
| 7. Humidity | 90% |
| 8. Altitude | 1000 M. Above Sea Level |
| Required Characteristics | |
| 9. Standard / Code | ■ NEMA ■ANSI ■IEEE ■NEC ■IEC □ __________ |
| 10. Type of Load | |
| 11. Drived Method | □ Direct □ Belt □ Chain □ Gear |
| 12. Mounting Type | □ Horizontal □ Vertical □ Foot □ Flange |
| 13. Starting Method | ■ Across-the-line □Y-△ □ Auto-transformer □ Reactor _____________ |
| 14. No. of Start / Hour | _______Times |
| 15. Rotor Type | ■ Squirrel-cage □Wound |
| 16. Insulation Class | □ B □F ____________ |
| 17. Max. Temperature Rise | ________℃ |
| 18. Winding Connection | □Y □ △ |
| 19. Service Factor | □1.0 □1.10 □1.15 ■1.25 □______ |
| 20. Slip at Full Load S | Max. |
| 21. Space Heater | □Yes □No _______V, _______Ph., _______Hz |
| 22. Enclosure | □TEFC □TENV ■Explosion-proof □WP-I □WP-II □ _____________ _____________ |
| 23. Rotating Direction | □CW □OCW □Both (Viewed from un-driving end) |
| 24. Thermal Protection | ■Yes, Type____________ □No |
| 25. Winding Temperature Detector | □Yes, Type____________ ■No |
| 26. Bearing Temperature Detector | □Yes, Type____________ ■No |
| 27. Differential Protection | □Yes, Type____________ ■No |
| 28. Vibration Detector | □Yes, Type____________ ■No |
| 29. Surge Protection | □Yes, Type____________ □No |
| 30. Terminal Box | ■Right □Left (Viewed from un-driving end) |
| 31. No. of Terminal | □Three □Six |
| 32. Painting | Munsell No. |
| 33. Grounding Tap | ■In Terminal Box □On Frame |
| 34. Test | ■Winding Resistance Measurement ■No-Loading Test □Full-Loading Test ■Locked Rotor Test ■High Potential Test □ |
BY MANUFACTURER SHEET NO.________OF_________
| Maker’s Job No. | For |
| Motor No. | |
| 1. Rating | ________HP/KW, ________V, ________ Ph., ________Hz, Syn. Speed _________RPM |
| Motor Characteristics | |
| 2. LRC / FLC | p.u. |
| 3. LRT / FLT | p.u. |
| 4. Load | 1/2 ∣ 3/4 ∣ Full |
| 5. Current (A) | ∣ ∣ |
| 6. Power Factor (X) | ∣ ∣ |
| 7. Efficiency (X) | ∣ ∣ |
| 8. Speed (RPM) | ∣ ∣ |
| 9.Starting Power Current | __________________ |
| 10. Max. Voltage Drop Allowable at Starting | |
| 11. Locked Rotor Current | _____________A, ____________p.u. |
| 12. Space Heater | □ Yes □No _________V, __________ph., _________Hz |
| 13. Enclosure | □ TEFC □TENV □Explosion-proof □WP-I □WP-II □ ___________ |
| 14. Thermal Protection | □Yes, Type____________ □No |
| 15. Winding Temperature Detector | □Yes, Type____________ □No |
| 16. Bearing Temperature Detector | □Yes, Type____________ □No |
| 17. Differential Protection | □Yes, Type____________ □No |
| 18. Vibration Detector | □Yes, Type____________ □No |
| 19. Surge Protection | □Yes, Type____________ □No ________ |
| 20. Frame Size | |
| 21. Hub Size | In. |
| 22. Noise Level | dBA. |
| 23. Bearing type | □Ball □Roller □Sleeve □Thrust □________ |
| 24. Lubrication Type | □Grease □ __________ |
| 25. Lube Oil | |
| 26. Frequency of Lubrication | |
| 27. Weight | Rotor__________ kg, Total __________ kg |
| Remarks |
Copyright © 2019-2025 51dongshi.net 版权所有
违法及侵权请联系：TEL:177 7030 7066 E-MAIL:11247931@qq.com 本站由北京市万商天勤律师事务所王兴未律师提供法律服务
