san交换机命令合集

此项目主要是IBM高端存储系统DS8100和磁带库TS3500(3584)和两台B光纤交换机.在这里先将光纤交换机的配置做个总结,存储系统DS8100请参见其它文章,一会有空我再将项目中的DS8100配置和实施过程做总结.请注意留意我的空间.谢谢.:)呵呵.

再做存储项目时常常会用到光纤交换机的配置,其中有一个zone的配置方法.其实很简单,现在我将其两种常用的方法做下总结,以供朋友们参考,一种是基于端口的划分,另一种是基于WWW-NAME的划分方法.

下面就将这两种划分方法做说明:

端口zone

zonecreate "z1

configuration.

authutil Get and set authentication configuration

backplanetest Backplane connection test for multi-blade systems.

backport Test for back-end ASIC pair to ASIC pair links.

bannerset Set security banner

bannershow Display security banner

bcastshow Display broadcast routing information

bladebeacon Enables or disables blade beaconing or displays the

current mode.

bladedisable Disables all user ports on a blade.

bladeenable Enables all User Ports on a blade.

burninerrclear Clear errors that are stored in the non-volatile

storage

burninerrshow Display errors that are stored in the non-volatile

storage

burninstatus Display the diagnostics burnin status.

camtest Verify QuickLoop's Content Addressable Memory

(CAM).SID translation

centralmemorytest Test ASIC central memory operation.

cfgactvshow Display Effective zone configuration information

cfgadd Add a member to a configuration

cfgclear Clear all zone configurations

cfgcreate Create a zone configuration

cfgdelete Delete a zone configuration

cfgdisable Disable a zone configuration

cfgenable Enable a zone configuration

cfgremove Remove a member from a configuration

cfgsave Save zone configurations in flash

cfgshow Print zone configuration information

cfgsize Print size details of zone database

cfgtransabort Abort zone configuration transaction

cfgtransshow Print zone configurations in transaction buffer

chassisconfig Display or set the chassis configuration

chassisname Display or set the chassis's Name

chassisshow Display all Field Replaceable Units (FRU)

chipregshow Displays the port registers for a given chip

number.

cmemretentiontest Data retention test of the central memory SRAMs.

cmitest Verify CMI bus between ASICs.

configdefault Reset config to factory default

configdownload Load switch config from a server

configshow Print switch config parameters

configupload Save switch config to a server

configure Set switch config parameters

datatypeshow Display available diagnostic data types.

date Print/set the system date and time

dbgshow Display debug levels of various modules

defzone Activates or deactivates a default zone

configuration.

diagclearerror Clears diagnostics failure status.

diagcommandshow Display diagnostic command descriptions.

diagdisablepost Disable diagnostic POST.

diagenablepost Enable diagnostic POST.

diagenv Diagnostic debug parameters management package.

diaghelp Display diagnostic command descriptions.

diagloopid Select the diagnostics loop ID.

diagmodeshow Displays diagnostic mode configuration.

diagpost Displays the contents of port registers and

memories.

diagretry Sets diagnostic retry mode

diagsetburnin Initializes the blade for a burnin run.

diagsetcycle Set diagnostic script parameters.

diagsetesdmode Set or display ESD mode.

diagsetshowtime Set or display diagnostic show-time mode.

diagshow Display diagnostic status.

diagshowtime Set or display diagnostic show-time mode.

diagstatus Display currently running diagnostic tests.

diagstopburnin Terminate burnin run on a blade.

distribute Distributes data to switches in a fabric.

dlsreset Turn off the dynamic load sharing (DLS) option

dlsset Turn on the dynamic load sharing (DLS) option

dlsshow Display the state of the dynamic load sharing

option

dnsconfig Configure DNS service

enclosureshow Display the switch enclosure attributes

errclear Clear error log

errdelimiterset Sets the error log start and end delimiter for

messages sent to the console and syslog

errdump Print error log (no page breaks)

errfilterset Sets a filter for an error log destination

errmoduleshow Displays all the defined modules in the system

errshow Print error log

fabportshow Display contents of a particular port's data

fabretryshow Display retry count of various fabric commands

fabriclog Displays or manipulates the fabric log

fabricprincipal Displays/Enables/Disables Principal Switch

Selection mode

fabricshow Print fabric membership info

fabstateclear Clears the fabric state information

fabstateresize Changes the number of state entries

fabstateshow Displays the fabric state information

fabstatsshow Displays the fabric statistics information

fabswitchshow Display fabric switch state information

fandisable Disables a fan unit.

fanenable Enables a fan unit.

fanshow Print fan status

fastboot Reboot this s

witch and bypass POST

fastwritecfg Configure FC fastwrite feature

fazoneadd Add a member to a fabric assist zone

fazonecreate Create a fabric assist zone

fazonedelete Delete a fabric assist zone

fazoneremove Remove a member from a fabric assist zone

fazoneshow Print Fabric Assist Zone information

fcipchiptest Functional Test of Components in FCIP Complex.

fciphelp Print FCIP help info

fcippathtest Data Path Test of the FCIP complex.

fcping Sends a FC ELS ECHO request to a port

fcplogclear Clear the FCP log

fcplogdisable Disable logging of FCP events

fcplogenable Enable logging of FCP events

fcplogshow Display FCP probing log information

fcpprobeshow Display FCP probing information

fcprlsshow Display FCP RLS (read link state) information

fcrchiptest Functional Test of FCR FPGA.

fcrconfigure Sets FC Router configuration parameters.

fcrfabricshow Displays FC Routers on a backbone fabric.

fcrlsancount Display maximum LSAN zone limit.

fcrlsanmatrix Manage LSAN fabric matrix configuration.

fcrpathtest Data Path Test on Connection between FCR FPGA and

Central ASIC.

fcrphydevshow Displays FC Router physical device information.

fcrproxyconfig Displays or configures proxy devices presented by

an FC Router.

fcrproxydevshow Displays FC Router proxy device information.

fcrresourceshow Displays FC Router physical resource usage.

fcrrouterportcost Displays FC Router route information.

fcrrouteshow Displays FC Router route information.

fcrxlateconfig Displays or persistently configures a translate

(xlate) domain's domain ID for both

EX_Port-attached fabric and backbone fabric.

fddcfg fddcfg manages the fabric data distribution

configuration parameters.

fdmicacheshow Display abbreviated remote FDMI device information

according to remote domain ID

fdmishow Display detailed FDMI device information

ficonclear Clears contents of the specified FICON management

database

ficoncupset Sets FICON-CUP parameters for a switch

ficoncupshow Displays FICON-CUP parameters for a switch

ficonhelp Displays FICON commands

ficonshow Displays contents of the specified FICON management

database

filtertest Run frame filter test for bloom ASICs.

firmwarecommit Commit

firmware to stable storage

firmwaredownload Download firmware into switch

firmwaredownloadstatus Display the progress and status of firmwareDownload

firmwarerestore Restore the old firmware in the switch

firmwareshow Display firmware versions in the switch

fosconfig Enable/disable FabOS services

fporttest Functional test of F->N N->F point to point path.

framerpathtest Tests data path between ASICs

frureplace Replace a Field Replacable Unit

fspfshow Print FSPF global information

fwalarmsfilterset Configure alarms filtering for Fabric Watch

fwalarmsfiltershow Show alarms filtering for Fabric Watch

fwclassinit Initialize all Fabric Watch classes

fwconfigreload Reload Fabric Watch configuration

fwconfigure Configure Fabric Watch

fwfrucfg Configure FRU state and notification

fwhelp Print Fabric Watch help info

fwmailcfg Configure Fabric Watch Email Alert

fwportdetailshow Create a report with detailed port information

fwsamshow Show availability monitor information

fwset Set port persistence time

fwsettocustom Set boundary & alarm level to custom

fwsettodefault Set boundary & alarm level to default

fwshow Show thresholds monitored and port persistence time

grep Linux grep command

h Print shell history

hadisable Disables the High Availability feature in the

switch.

hadump Displays information about the status of the High

Availability feature in the switch.

haenable Enables the High Availability feature in the switch

hafailover Forces the failover mechanism so that the Standby

Control Processor (CP)becomes the Active CP.

hashow Displays control processor (CP) status

hasyncstart Enables HA state synchronization.

hasyncstop Disables the HA state synchronization.

help Print this list

historylastshow Displays last history record

historymode Display or set the mode of the history log

historyshow Displays entire history log

httpcfgshow Used to show the version of the Java plug-in used

by the Webtools

i Display process summary

ifmodeset Set the link operating mode for a network interface

ifmodeshow Display the link operating mode for a network

interface

interfaceshow Display the FSPF (TM) interface information

interopmode Display

s/enables/disables Brocade switch

interoperability with switches from other

manufacturers

iodreset Turn off the in-order delivery (IOD) option

iodset Turn on the in-order delivery (IOD) option

iodshow Display the state of the in-order delivery option

ipaddrset Set ethernet and FC IP addresses

ipaddrshow Print ethernet and FC IP addresses

ipfilter Manage/display IP filters

iscsihelp Print iSCSI help info

islshow Display the current connections and status

killtelnet Terminate telnet/serial login sessions

interactively

licenseadd Adds license keys to switch

licensehelp Print license help info

licenseidshow Displays the system license ID

licenseport Configure per-port POD license assignments

licenseremove Removes a license key from this system

licenseshow Displays current license keys

linkcost Set or print the FSPF cost of a link

login Login as a new user

logout Logout from remote session

loopporttest Functional test of L-port M->M path on a loop.

lsdbshow Displays the FSPF link state database

memshow Display memory usage in the system.

minicycle Functional test of internal and external transmit

and receive paths at full speed.

minispropshow Displays ASIC pair properties.

more Linux more command

mscapabilityshow Display Management Server Capability.

msconfigure Configure Management Server

msplatshow Display the Management Server Platform Database

msplatshowdbcb Display the Management Server Database Control

Block

msplcleardb Clear the Management Server Platform Database

fabric-wide

msplmgmtactivate Activate the Management Server Platform Database

fabric-wide

msplmgmtdeactivate Deactivate the Management Server Platform Database

fabric-wide

mstddisable Disables the Management Server Topology Discovery

Management Service

mstdenable Enables the Management Server Topology Discovery

Management Service

mstdreadconfig Display status of Management Server Topology

Discovery Service

myid Display the current login session details

nbrstateshow Display FSPF (TM) neighbors' states

nbrstatsclear Reset the FSPF (TM) interface counters

netsta

t Display network connections and statistics

nodefind Display all the devices' PID matching the given

world wide name

nsaliasshow Display local Name Server information with Aliases

nsallshow Print global Name Server information

nscamshow Print local Name Server Cache information

nsshow Print local Name Server information information

nszonemember Display the information of all the online devices

which are zoned with the given device.

opensource Display information on open source software

utilized in FabOS

passwd Set usernames and passwords

passwdcfg passwdcfg manages the password policies.

pathinfo Display routing information between two ports

pdshow Show information from Panic Dump file

perfaddeemonitor Add end-to-end monitor

perfaddipmonitor Add monitor for IP trafic frame count

perfaddreadmonitor Add filter-based monitor - SCSI Read

perfaddrwmonitor Add monitor - SCSI Read and Write

perfaddscsimonitor Add monitor for SCSI frame count

perfaddusermonitor Add filter-based monitor

perfaddwritemonitor Add filter-based monitor - SCSI Write

perfcfgclear Clear Performance settings from FLASH

perfcfgrestore Restore Performance configuration from FLASH

perfcfgsave Save Performance configuration to FLASH

perfclearalpacrc Clears the CRC error count associated with a port

and Arbitrated Loop Physical Address (AL_PA).

perfcleareemonitor Clears statistics counters of one or more

end-to-end performance monitors.

perfclearfiltermonitor Clears counters of one or more filter-based

performance monitors.

perfdeleemonitor Delete end-to-end monitor

perfdelfiltermonitor Delete filter-based monitor

perfhelp Print Performance Monitoring help info

perfmonitorclear Clear end-to-end/filter-based/ISL monitors

perfmonitorshow Show end-to-end/filter-based/ISL monitors

perfsetporteemask Set overall mask for end-to-end monitors

perfshowalpacrc Get ALPA CRC count by port and ALPA

perfshoweemonitor Show user-defined end-to-end monitors

perfshowfiltermonitor Show filter-based monitors

perfshowporteemask Show the current end-to-end mask

pkicreate Creates public key infrastructure (PKI) objects

pkiremove Removes existing public key infrastructure (PKI)

objects

pkishow Displays existing public key infrastructure (PKI)

objects

policy

Configure IPSec encryption and authentication

algorithms

portalpashow Show the ALPAs of a port

portbuffershow Print the buffer allocations for the ports of a

quad

portcamshow Display filter utilization

portcfg Create/Delete a new ip interface/route/arp entry on

the GigE port

portcfgdefault Restore the port configuration to defaults

portcfgeport Enable/Disable a port from becoming E_Port

portcfgexport Sets a port to be an EX_Port and sets and displays

EX_Port configuration parameters.

portcfggport Lock a port as a G_Port

portcfgislmode Configure a port to be ISL R_RDY Mode

enabled/disabled

portcfglongdistance Configure a Long Distance Port

portcfglport Lock a port as a L_Port

portcfgnpivport Enables and disables NPIV functionality on a port.

portcfgnport Enable/disable N_Port capability for a port

portcfgpersistentdisable Persistently disable a port

portcfgpersistentenable Enable a persistently disabled port

portcfgshow Displays port configuration settings.

portcfgspeed Configure a port to a particular speed level

portcfgtrunkport Configure a port for trunking

portcfgvexport Sets a port to be an VEX_Port connected to FC-IP

and sets and displays VEX_Port configuration

parameters.

portcmd Execute commands (ping etc) on the GigE port

portdebug Set debug level and verbosity level of port modules

portdisable Disable a specified port

portenable Enable a specified port

porterrshow Print port error summary

portflagsshow Display the port status bitmaps of all ports in a

switch

portledtest Cycle user port LEDs.

portlogclear Clear port activity log

portlogconfigshow Display portlog configuration

portlogdisable Disable portlog facility

portlogdump Print port log (no page breaks)

portlogdumpport Print port log (no page breaks)

portlogenable Enables port log facility

portlogeventshow Display information about port log events

portloginshow Display port login information

portlogpdisc Set or clear the debug_pdisc_flag

portlogreset Enable portlog facility

portlogresize Resize the port log

portlogshow Print port activity log

portlogshowport Print port activity log

portlogtypedisable Disable port logging

portlogtypeenable Enable port logging

portloopbacktest Functional

test of port N->N path.

portmirror Set a port's configuration to be disabled or

enabled

portname Assign or display the name associated with a port

portperfshow Print port throughput numbers

portregtest Write/read test of the ASIC SRAMs portregtest.

portrouteshow Display various routing tables for a port

portshow Show configured ip interfaces/routes/arp entries on

the GigE Port

portstatsshow Display the -bit hardware statistics for a port

portstatsclear Clear the status of a specified switch port

portstatsshow Print hardware statistics

portswap Swaps area numbers

portswapdisable Disable portswap feature

portswapenable Enable portswap feature

portswapshow Display port and area information

porttest Functional test on a live fabric. Starts porttest.

porttestshow Retreive information from porttest.

portzoneshow Displays the enforced zone type of the F/FL-ports

of a switch.

powerofflistset sets slot power off list order

powerofflistshow Displays slot power-off order.

psshow Print power supply status

quietmode Displays/enables/disables quietmode on telnet

session

reboot Reboot this processor

routehelp Print routing help info

saschiptest Functional Test of Components in SAS Complex.

saspathtest Data Path Test of the SAS complex.

secactivesize Displays size of the active (security) database

secauthsecret Creates/Manages DHCHAP secret key details

seccertutil Creates/Manages/Displays third party PKI

certificates

secdefinesize Displays size of the defined (security) database

secfabricshow Displays security related fabric information

secfcsfailover Forces primary role to this FCS switch

secglobalshow Displays current internal security state

information

sechelp Displays information about security commands

secmodedisable Disables secure mode

secmodeenable Enables secure mode

secmodeshow Displays whether secure mode is enabled or disabled

secnonfcspasswd Sets the admin passwd for non-FCS switches

secpolicyabort Aborts changes to defined policy

secpolicyactivate Activates all policy sets

secpolicyadd Adds members to an existing policy

secpolicycreate Creates a new policy

secpolicydelete Deletes an existing policy

secpolicydump Displays all members of existing policies

se

cpolicyfcsmove Moves a member in the FCS policy

secpolicyremove Removes members from an existing policy

secpolicysave Saves defined policy set and sends to all switches

secpolicyshow Shows members of one or more policies

secstatsreset Resets security statistics

secstatsshow Displays security statistics

sectemppasswdreset Resets temporary password

sectemppasswdset Sets temporary password

sectransabort Aborts current transaction

secversionreset Resets version stamp

sensorshow Display sensor readings

setdbg Set debug level of the specified module

setesdmode Set or display ESD mode.

setmfgmode Set or display diagnostic MFG mode.

setmodem Enables or disables modem login to a control

processor (CP)

setsplbmode Set or display SPLB mode.

setverbose Set verbosity level of the specified module

sfpshow Print Serial ID SFP information

shellflowcontroldisable Disable xon-xoff flow control on console serial

port

shellflowcontrolenable Enable xon-xoff flow control on console serial port

slotpoweroff Removes power from a slot.

slotpoweron Restores power to a slot.

slotshow Displays the status of all slots in the system.

sltest Serial link test of port N->N path.

snmpconfig Configure SNMP

snmpmibcapset Set options for configuring SNMP Mib/Trap

Capability

snmpmibcapshow Show SNMP Mib/Trap Configuration

spinfab Functional test of switch to switch ISL cabling and

trunk group operation.

spinjitter line-speed jitter measurement

spinsilk Functional test of internal and external transmit

and receive paths at full speed

sramretentiontest Data retention test of the miscellaneous SRAMs in

ASIC.

statsclear Clear port and diagnostic statistics.

statstest Statistics counter test for the ASICs.

stopporttest Terminate the running porttest.

supportffdc Modifies or displays first-failure data capture

(FFDC) configuration.

supportftp set support Ftp parameters

supportsave retrieve support data from switch to host

supportshow Prints switch information for debugging purposes.

supportshowcfgdisable Disables a group of commands under supportshow

command.

supportshowcfgenable Enables a group of commands under supportshow

command.

supportshowcfgshow

Displays the groups of commands enabled for

display. by the supportshow command.

switchbeacon Set switch beacon on or off

switchcfgpersistentdisable Persistently disable a switch

switchcfgpersistentenable Enable a persistently disabled switch

switchcfgspeed Configures all ports of the switch to a particular

speed level

switchcfgtrunk Configure all ports on the switch for trunking

switchdisable Disable this switch

switchenable Enable this switch

switchname Print/set this switch's name

switchreboot Halts and restarts the operational switch.

switchshow Print switch and port status

switchstatuspolicyset Set policy parameters for overall switch status

switchstatuspolicyshow Print policy parameters for overall switch status

switchstatusshow Print overall switch status

switchuptime Display the amount of time for which the switch is

up

syslogdfacility Change the syslog facility

syslogdipadd Add syslog daemon IP address

syslogdipremove Remove syslog daemon IP address

syslogdipshow Print the syslog daemon targets

sysshutdown Provides a graceful shutdown to protect the switch

file systems.

systemverification Run a suit of diagnostic tests on all switches in a

system.

tempshow Print temperature readings

timeout Set/show the IDLE timeout value for a login session

topologyshow Display the unicast fabric topology

tracedump generate/remove trace dump or display trace dump

status

trackchangeshelp Print Track Changes help info

trackchangesset Configure alert for login/logout/config update

trackchangesshow Displays status of track changes

trunkdebug Debug a trunk link failure

trunkshow Display trunking information

tsclockserver Displays or sets the NTP server address

tstimezone Displays or sets the time zone

turboramtest Turbo SRAM test for bloom ASICs.

txdpath Functional test of ASIC pair TXA TXD connections.

uptime Print how long switch has been up

urouteconfig Configure a static route

urouteremove Remove a static route

urouteshow Display unicast routing information

userconfig Display or configure user accounts

userrename Rename user login name

version Print firmware version

wwn Display or set the world wide name

zone Copies/Removes/Validates zone objects

zoneadd Add a

member to a zone

zonecreate Create a zone

zonedelete Delete a zone

zonehelp Print zoning help info

zoneobjectcopy Copies a zone object

zoneobjectexpunge Expunges a zone object

zoneobjectrename Rename a zoning Object

zoneremove Remove a member from a zone

zoneshow Print zone information

本文来自ChinaUnix博客，如果查看原文请点：http://blog.chinaunix.net/u/2984/showart_1328149.html