ANSI | BS | DIN | EN | GB | ISO | JIS | NF | DIC
| 编号 | 中文名称 | 英文名称 |
| IEC 60962-1988 | 汽轮机用石油润滑油的维护与使用指南 | Maintenance and use guide for petroleum lubricating oils for steam turbines |
| IEC 61221-2004 | 石油产品和润滑剂.三芳基磷酸酯涡轮机控制液(ISO-L-TCD类).规范 | Petroleum products and lubricants - Triaryl phosphate ester turbine control fluids (category ISO-L-TCD) - Specifications |
| ISO 10050-2005 | 润滑剂、工业润滑油和相关产品（L类）.T（涡轮机）族.三芳基磷酸脂涡轮机控制液体规范(类别 ISO-L-TCD) | Lubricants, industrial oils and related products (class L) - Family T (Turbines) - Specifications of triaryl phosphate ester turbine control fluids (category ISO-L-TCD) |
| ISO 10129-2006 | 滑动轴承.轴承金属的试验.静态条件下润滑油的耐腐蚀性 | Plain bearings - Testing of bearing metals - Resistance to corrosion by lubricants under static conditions |
| ISO 10438-1-2003 | 石油、化工和天然气工业.润滑、油封、控油系统和辅助装置.第1部分:一般要求 | Petroleum, petrochemical and natural gas industries - Lubrication, shaft-sealing and control-oil systems and auxiliaries - Part 1: General requirements |
| ISO 10438-2-2003 | 石油、化工和天然气工业.润滑、油封、控油系统和辅助装置.第2部分:专用油系统 | Petroleum, petrochemical and natural gas industries - Lubrication, shaft-sealing and control-oil systems and auxiliaries - Part 2: Special-purpose oil systems |
| ISO 10438-3-2003 | 石油、化工和天然气工业.润滑、油封、控油系统和辅助装置.第3部分:通用油系统 | Petroleum, petrochemical and natural gas industries - Lubrication, shaft-sealing and control-oil systems and auxiliaries - Part 3: General-purpose oil systems |
| ISO 10438-4-2003 | 石油、化工和天然气工业.润滑、油封、控油系统和辅助装置.第4部分:自动气封支撑系统 | Petroleum, petrochemical and natural gas industries - Lubrication, shaft-sealing and control-oil systems and auxiliaries - Part 4: Self-acting gas seal support systems |
| ISO 10792-1-1995 | 航空航天 飞机结构用不锈钢自润滑球面滑动轴承 第1部分:米制系列 | Aerospace - Airframe spherical plain bearings in corrosion-resisting steel with self-lubricating liner - Part 1: Metric series |
| ISO 10792-2-1995 | 航空航天 飞机结构用不锈钢自润滑球面滑动轴承 第2部分:英制系列 | Aerospace - Airframe spherical plain bearings in corrosion-resisting steel with self-lubricating liner - Part 2: Inch series |
| ISO 10792-3-1995 | 航空航天 飞机结构用不锈钢自润滑球面滑动轴承 第3部分:技术规范 | Aerospace - Airframe spherical plain bearings in corrosion-resisting steel with self-lubricating liner - Part 3: Technical specification |
| ISO 11007-1997 | 石油产品和润滑剂 润滑脂防锈性能的测定 | Petroleum products and lubricants - Determination of rust-prevention characteristics of lubricating greases |
| ISO 11009-2000 | 石油产品和润滑剂 润滑脂抗水淋特性的测定 | Petroleum products and lubricants - Determination of water washout characteristics of lubricating greases |
| ISO 11158-1997 | 润滑剂、工业润滑油和有关产品(L类) H组(液压系统) HH、HL、HM、HR、HV和HG各品种的规格 | Lubricants, industrial oils and related products (class L) - Family H (hydraulic systems) - Specifications for categories HH, HL, HM, HR, HV and HG |
| ISO 12128-2001 | 滑动轴承 润滑油孔、油槽和油穴 尺寸、类型、标记及其应用 | Plain bearings - Lubrication holes, grooves and pockets - Dimensions, types, designation and their application to bearing bushes |
| ISO 12156-1-2006 | 柴油.使用高频往复装置(HFRR)进行润滑油评定.第1部分:试验方法 | Diesel fuel - Assessment of lubricity using the high-frequency reciprocating rig (HFRR) - Part 1: Test method |
| ISO 12156-2-2007 | 柴油.使用高频往复装置(HFRR)进行润滑评估.第2部分:限值 | Diesel fuel - Assessment of lubricity using the high-frequency reciprocating rig (HFRR) - Part 2: Limit |
| ISO 12167-1-2001 | 滑动轴承 静态条件下带有排泄槽的液压滑动轴颈轴承 第1部分：带有排泄槽的润滑油滑动轴颈轴承的计算 | Plain bearings - Hydrostatic plain journal bearings with drainage grooves under steady-state conditions - Part 1: Calculation of oil-lubricated plain journal bearings with drainage grooves |
| ISO 12167-2-2001 | 滑动轴承 静态条件下带有排泄槽的液压滑动轴颈轴承 第2部分：带有排泄槽的润滑油滑动轴颈轴承的计算用特 | Plain bearings - Hydrostatic plain journal bearings with drainage grooves under steady-state conditions - Part 2: Characteristic values for the calculation of oil-lubricated plain journal bearings with drainage grooves |
| ISO 12168-1-2001 | 滑动轴承 静态条件下不带排泄槽的液压滑动轴颈轴承 第1部分：不带排泄槽的润滑油滑动轴颈轴承的计算 | Plain bearings - Hydrostatic plain journal bearings without drainage grooves under steady-state conditions - Part 1: Calculation of oil-lubricated plain journal bearings without drainage grooves |
| ISO 12168-2-2001 | 滑动轴承 静态条件下不带排泄槽的液压滑动轴颈轴承 第1部分：不带排泄槽的润滑油滑动轴颈轴承的计算用特 | Plain bearings - Hydrostatic plain journal bearings without drainage grooves under steady-state conditions - Part 2: Characteristic values for the calculation of oil-lubricated plain journal bearings without drainage grooves |
| ISO 12922 Technical Corrigendum 1-2001 | 润滑剂、工业润滑油和有关产品(L类) H组(液压系统) HFAE、HFAS、HFB、HFC、HFDR和HFDU各品种的规格 技术勘 | Lubricants, industrial oils and related products (class L) - Family H (Hydraulic systems) - Specifications for categories HFAE, HFAS, HFB, HFC, HFDR and HFDU; Technical Corrigendum 1 |
| ISO 12922-1999 | 润滑剂、工业润滑油和有关产品(L类) H组(液压系统) HFAE、HFAS、HFB、HFC、HFDR和HFDU各品种的规格 | Lubricants, industrial oils and related products (class L) - Family H (Hydraulic systems) - Specifications for categories HFAE, HFAS, HFB, HFC, HFDR and HFDU |
| ISO 12925-1 Technical Corrigendum 1-2002 | 润滑剂、工业用油和相关产品(L类).(齿轮)C种.第1部分:密封齿轮系统用润滑剂.技术勘误1 | Lubricants, industrial oils and related products (class L) - Family C (Gears) - Part 1: Specifications for lubricants for enclosed gear systems; Technical Corrigendum 1 |
| ISO 12925-1-1996 | 润滑剂、工业润滑油和有关产品(L类) C组(齿轮) 第1部分:密式齿轮系统用润滑剂规格 | Lubricants, industrial oils and related products (class L) - Family C (Gears) - Part 1: Specifications for lubricants for enclosed gear systems |
| ISO 13357-1-2002 | 石油产品.润滑油可过滤性测定.第2部分:水中过滤油的程序 | Petroleum products - Determination of the filterability of lubricating oils - Part 1: Procedure for oils in the presence of water |
| ISO 13357-2-2005 | 石油产品.润滑油的可过滤性测定.第2部分:干性油技术 | Petroleum products - Determination of the filterability of lubricating oils - Part 2: Procedure for dry oils |
| ISO 13737-2004 | 石油产品和润滑剂.润滑剂脂的低温针入度的测定 | Petroleum products and lubricants - Determination of low-temperature cone penetration of lubricating greases |
| ISO 13738-2000 | 润滑剂、工业润滑油和有关产品(L类) E组(内燃机油) 二冲程汽油机油规格(EGB、EGC、EGD) | Lubricants, industrial oils and related products (class L) - Family E (Internal combustion engine oils) - Specifications for two-stroke-cycle gasoline engine oils (categories EGB, EGC and EGD) |
| ISO 13944-1996 | 含润滑剂的金属粉末混合物 润滑剂含量测定 索格利特萃取法 | Lubricated metal-powder mixes - Determination of lubricant content - Modified Soxhlet extraction method |
| ISO 14635-3-2005 | 齿轮.FZG试验程序.第3部分:半流齿轮润滑脂压塑性变形承载能力和耐磨性用A/2、8/50 FZG试验方法 | Gears - FZG test procedures - Part 3: FZG test method A/2,8/50 for relative scuffing load-carrying capacity and wear characteristics of semifluid gear greases |
| ISO 15380-2002 | 润滑剂、工业用油和相关产品(L类).系列H(液压系统).HETG, HEPG, HEES 和 HEPR类的规范 | Lubricants, industrial oils and related products (class L) - Family H (Hydraulic systems) - Specifications for categories HETG, HEPG, HEES and HEPR |
| ISO 104-2000 | 成像材料 冲洗过的胶片 测定润滑性方法 | Imaging materials - Processed films - Method for determining lubrication |
| ISO 19378-2003 | 润滑剂、工业用油和相关产品(L级).机床润滑剂.等级和规范 | Lubricants, industrial oils and related products (class L) - Machine-tool lubricants - Categories and specifications |
| ISO 2137-1985 | 石油产品 润滑脂和石油脂 锥入度的测定 | Petroleum products; Lubricating grease and petrolatum; Determination of cone penetration |
| ISO 21469-2006 | 机械安全.与附属产品接触的润滑剂.卫生要求 | Safety of machinery - Lubricants with incidental product contact - Hygiene requirements |
| ISO 2176 Technical Corrigendum 1-2001 | 石油产品 润滑脂 滴点的测定 技术勘误1 | Petroleum products - Lubricating grease - Determination of dropping point; Technical Corrigendum 1 |
| ISO 2176-1995 | 石油产品 润滑脂 滴点的测定 | Petroleum products - Lubricating grease - Determination of dropping point |
| ISO 24254-2007 | 润滑剂、工业用油和相关产品(L级).E族(内燃机油).四冲程循环摩托车汽油发动机和相关动力传动系统用油的规范 | Lubricants, industrial oils and related products (class L) - Family E (internal combustion engine oils) - Specifications for oils for use in four-stroke cycle motorcycle gasoline engines and associated drivetrains (categories EMA and EMB) |
| ISO 3046-1-2002 | 往复式内燃机.性能.第1部分:功率、燃料消耗量和润滑油消耗量和试验方法说明.通用内燃机的附加要求 | Reciprocating internal combustion engines - Performance - Part 1: Declarations of power, fuel and lubricating oil consumptions, and test methods; Additional requirements for engines for general use |
| ISO 3156-1976 | 矿井提升用的绞合钢丝绳 防锈剂、润滑剂和维修保养 特性和试验 | Stranded wire ropes for mine hoisting; Impregnating compounds, lubricants and service dressings; Characteristics and tests |
| ISO 3448 Technical Corrigendum 1-1993 | 工业液体润滑剂.ISO粘度分级.技术勘误1 | Industrial liquid lubricants - ISO vicosity classification; Technical Corrigendum 1 |
| ISO 3448-1992 | 工业液体润滑剂 ISO粘度分级 | Industrial liquid lubricants; ISO vicosity classification |
| ISO 3547-3-2006 | 滑动轴承.卷制轴套.第3部分:润滑油孔、油槽和油穴 | Plain bearings - Wrapped bushes - Part 3: Lubrication holes, grooves and indentations |
| ISO 3987-1994 | 石油产品 润滑油和添加剂 硫酸盐灰分的测定 | Petroleum products - Lubricating oils and additives - Determination of sulfated ash |
| ISO 413-1974 | 航空器 润滑油加嘴的头部 | Aircraft; Heads of lubricating nipples |
| ISO 4346-1977 | 一般用途钢丝绳 润滑剂 基本要求 | Steel wire ropes for general purposes; Lubricants; Basic requirements |
| ISO 4378-3-1983 | 滑动轴承 术语、定义和分类 第3部分:润滑 三种语言版 | Plain bearings; Terms, definitions and classification; Part 3 : Lubrication Trilingual edition |
| ISO 5169-1977 | 机床 润滑说明书的形式 | Machine tools; Presentation of lubrication instructions |
| ISO 5170-1977 | 机床 润滑系统 | Machine tools; Lubrication systems |
| ISO 6247 Technical Corrigendum 1-1999 | 石油产品 润滑油发泡特性的测定 技术勘误1 | Petroleum products - Determination of foaming characteristics of lubricating oils; Technical Corrigendum 1 |
| ISO 6247-1998 | 石油产品 润滑油发泡特性的测定 | Petroleum products - Determination of foaming characteristics of lubricating oils |
| ISO 6281-2007 | 滑动轴承.试验机内流体动压和混合润滑条件下的测试 | Plain bearings - Testing under conditions of hydrodynamic and mixed lubrication in test rigs |
| ISO 6299-1998 | 石油产品 润滑脂滴点(宽温度范围)的测定 | Petroleum products - Determination of dropping point of lubricating greases (wide temperature range) |
| ISO 6392-1-1996 | 土方机械 润滑件 第1部分:油杯 | Earth-moving machinery - Lubrication fittings - Part 1: Nipple type |
| ISO 6392-2-1996 | 土方机械 润滑件 第2部分:黄油喷嘴 | Earth-moving machinery - Lubrication fittings - Part 2: Grease-gun nozzles |
| ISO 15-2005 | 内燃机.离心式润滑油滤清器.尺寸 | Internal combustion engines - Spin-on filters for lubricating oil - Dimensions |
| ISO 6617-1994 | 石油基润滑油 老化特性 氧化后残碳变化的测定 | Petroleum-based lubricating oils - Ageing characteristics - Determination of change in Conradson carbon residue after oxidation |
| ISO 6618 Technical Corrigendum 1-1999 | 石油产品和润滑剂.酸和中和碱值的测定.颜色指示剂滴定法.技术勘误1 | Petroleum products and lubricants - Determination of acid or base number - Coulour-indicator titration method; Technical Corrigendum 1 |
| ISO 6618-1997 | 石油产品和润滑剂 酸和中和碱值的测定 颜色指示剂滴定法 | Petroleum products and lubricants - Determination of acid or base number - Coulour-indicator titration method |
| ISO 6619-1988 | 石油产品和润滑剂 中和值 电位滴定法 | Petroleum products and lubricants; neutralization number; potentiometric titration method |
| ISO 6743-1-2002 | 润滑剂、工业用润滑油和有关产品(L类).分类.第1部分:A 组(全损耗系统) | Lubricants, industrial oils and related products (class L) - Classification - Part 1: Family A (Total loss systems) |
| ISO 6743-10-19 | 润滑剂、工业润滑油和有关产品(L类) 分类 第10部分:Y组(其他) | Lubricants, industrial oils and related products (class L); classification; part 10: family Y (miscellaneous) |
| ISO 6743-11-1990 | 润滑剂、工业润滑油和有关产品(L类) 分类 第11部分:P组(风动工具) | Lubricants, industrial oils and related products (class L); classification; part 11: family P (pneumatic tools) |
| ISO 6743-12-19 | 润滑剂、工业润滑油和有关产品(L类) 分类 第12部分:Q组(热传导液体) | Lubricants, industrial oils and related products (class L); classification; part 12: family Q (heat transfer fluids) |
| ISO 6743-13-2002 | 润滑剂、工业润滑油和有关产品(L类).分类.第13部分:G组(导轨) | Lubricants, industrial oils and related products (class L) - Classification - Part 13: Family G (Slideways) |
| ISO 6743-14-1994 | 润滑剂、工业润滑油和有关产品(L类) 分类 第14部分:U组(热处理) | Lubricants, industrial oils and related products (class L) - Classification - Part 14: Family U (Head treatment) |
| ISO 6743-2-1981 | 润滑剂、工业润滑油和有关产品(L类) 分类 第2部分:F组(锭子轴承、轴承和离合器) | Lubricants, industrial oils and related products (class L); Classification; Part 2 : Family F (Spindle bearings, bearings and associated clutches) |
| ISO 6743-3-2003 | 润滑剂、工业用润滑油和有关产品(L类).分类.第3部分:D组(压缩机) | Lubricants, industrial oils and related products (class L) - Classification - Part 3: Family D (Compressors) |
| ISO 6743-4-1999 | 润滑剂、工业润滑油和有关产品(L类) 分类 第4部分:H组(液压系统) | Lubricants, industrial oils and related products (class L) - Classification - Part 4: Family H (Hydraulic systems) |
| ISO 6743-5-2006 | 润滑剂、工业润滑油和相关产品(L类).分类.第5部分:T组(涡轮机) | Lubricants, industrial oils and related products (class L) - Classification - Part 5: Family T (Turbines) |
| ISO 6743-6-1990 | 润滑剂、工业润滑油和有关产品(L类) 分类 第6部分:C组(齿轮) | Lubricants, industrial oils and related products (class L); classification; part 6: family C (gears) |
| ISO 6743-7-1986 | 润滑剂、工业润滑油和有关产品(L类) 分类 第7部分:M组(金属加工) | Lubricants, industrial oils and related products (class L); Classification; Part 7 : Family M (Metalworking) |
| ISO 6743-8-1987 | 润滑剂、工业润滑油和有关产品(L类) 分类 第8部分:R组(防腐蚀临时保护) | Lubricants, industrial oils and related products (class L); Classification; Part 8: Family R (Temporary protection against corrosion) |
| ISO 6743-9-2003 | 润滑剂、工业用润滑油和相关产品(L类).分类.第9部分:X族(润滑脂) | Lubricants, industrial oils and related products (class L) - Classification - Part 9: Family X (Greases) |
| ISO 6743-99-2002 | 润滑剂、工业用润滑油和有关产品(L类).分类.第99部分:总则 | Lubricants, industrial oils and related products (class L) - Classification - Part 99: General |
| ISO 7120-1987 | 石油产品和润滑剂 石油原油和其他液体 水存在时防锈性能的测定 | Petroleum products and lubricants; Petroleum oils and other fluids; Determination of rust-preventing characteristics in the presence of water |
| ISO 7624-1997 | 石油产品和润滑剂 加抑制剂矿物汽轮机油 氧化稳定性的测定 | Petroleum products and lubricants - Inhibited mineral turbine oils - Determination of oxidation stability |
| ISO 7747-1983 | 道路车辆 全流式润滑油滤清器的滤芯 尺寸 | Road vehicles; Filter elements for full flow oil filters; Dimensions |
| ISO 7824-1986 | 造船及海上结构物 润滑油嘴 锥型及平肩型 | Shipbuilding and marine structures; Lubrication nipples; Cone and flat types |
| ISO 7905-1-1995 | 滑动轴承 轴瓦疲劳强度 第1部分:在液体动压润滑条件下试验台和使用中的滑动轴承 | Plain bearings - Bearing fatigue - Part 1: Plain bearings in test rigs and in applications under conditions of hydrodynamic lubrication |
| ISO 7967-6-2005 | 往复式内燃机.零部件和系统词汇.第6部分:润滑系统 | Reciprocating internal combustion engines - Vocabulary of components and systems - Part 6: Lubricating systems |
| ISO 8068-2006 | 润滑剂、工业润滑油和相关产品（L类）.T族（涡轮机）.涡轮机用润滑油规范 | Lubricants, industrial oils and related products (class L) - Family T (Turbines) - Specification for lubricating oils for turbines |
| ISO 8681-1986 | 石油产品和润滑剂 分类法 等级的定义 | Petroleum products and lubricants; Method of classification; Definition of classes |
| ISO 9219-2002 | 航空航天.滑轮用合金钢和镀镉或钛合金钢、MoS<下标2>润滑或耐腐蚀钢和钝化的紧公差柄、短螺纹薄六角头螺栓. | Aerospace - Bolts, thin hexagonal head, for pulleys, close tolerance shank, short thread, in alloy steel and cadmium-plated or in titanium alloy steel, MoS<(Index)2> lubricated or in corrosion-resistant steel and passivated - Dimensions and masses |
| ISO/TS 12927-1999 | 润滑剂、工业润滑油和有关产品(L级) M组(金属加工) 制定标准导则 | Lubricants, industrial oils and related products (class L) - Family M (Metalworking) - Guidelines for establishing specifications |
| ISO/TS 12928-1999 | 润滑剂、工业润滑油和有关产品(L级) R组(暂时保护防腐) 制定标准导则 | Lubricants, industrial oils and related products (class L) - Family R (Products for temporary protection against corrosion) - Guidelines for establishing specifications |
| ISO/TS 23556-2007 | 去除润滑油中柴油机烟灰用装置的性能试验方法.初始过滤效率 | Performance test method for diesel engine soot-removal devices in lubricating oils - Initial filtration efficiency |
| 编号 | 中文名称 | 英文名称 |
Copyright © 2019-2025 51dongshi.net 版权所有
违法及侵权请联系：TEL:177 7030 7066 E-MAIL:11247931@qq.com 本站由北京市万商天勤律师事务所王兴未律师提供法律服务
