管道支架图-8202.2

surrounding pipe support,

slide bearing and fixed point, ferritic steel;

temperature 20 °C to 300 °C; nominal diameter 25 to 200

Werknorm

8202-2

August 2001

1

2

3

3.1

3.2

4

5

1

-

-

-

Replaces Standard 8202

Version 08.00Slide bearings specified in this standard are designed for a maximum distance from the fixed point of 30 m. For longer distances, slide bearing length l1 must be checked and corrected as needed. The diagram in Fig.

8 on page 8 showing thermal expansion, fixed-point distances and temperature differences is intended as an aid.

FPS-type pipe supports for mounting system types A, B and C must have two or four drilled holes measuring ∅ 18. The position of the holes depends upon the mounting system type and can be determined on the basis of the diagrams in Section 3.1.

8110-F3 Mounting the pipe support 3.1 Mounting system types A, B and C

3.2 Mounting system types D1 and D2

Fig. 8. Ferritic steel

5 Weights, drawings

Table 8:Pipe support weights

List of standards cited

DIN 436Square washers for use in timber constructions

DIN 1017-1Steel bars; Hot rolled flat steel for general Purpose, dimensions, weights, permissible variations

DIN 1025-2Hot rolled I-beams; Part 2: Wide flange I-beams, IPB-series; Dimensions, masses, sectional properties

DIN EN 10 056-1Structural steel equal and unequal leg angles; Part 1: Dimensions; German version EN 10056-1:1998

DIN EN 10 056-2Structural steel equal and unequal leg angles; Part 2: tolerances on shape and dimen-sions; German version EN 10056-2:1993

DIN EN ISO 4016Hexagon head bolts; Product grades C (ISO 4016:1999); German version EN ISO 4016:200

DIN EN ISO 4018Hexagon head screws; Product grade C (ISO 4018:1999) German version EN ISO 4018:2000

DIN EN ISO 4034Hexagon nuts; Product grade C (ISO 4034:1999); German version EN ISO 4034:2000 DIN EN ISO 7091Plain washers; Normal series, Product grade C; (ISO 7091: 2000); German version EN ISO 7091:2000

CS 8101-1Heat insulation; insulation layer thickness, definitions, terms

CS 8110Pipe supports; anti-corrosion treatment; specifications

CS 8205-2Pipe supports, standing, laterally mobile, for pipes with heat insulation, surround pipe support, slide bearing and fixed point; temperature 20 ° C to 300 ° C; nominal diameter

25 to 200

CS 8226Pipe supports; glide plates and separator plates for piping from ND 25 to 100

CS 8227Pipe supports; hook bolts

CS 8250Pipe supports; pipe clamps for nominal diameters 15 to 1000

CS 8252Pipe supports; pipe clamps for nominal diameters 25 to 500

CS 8399Pipe supports; lock washers for double-angle bridge

Previous versions

CS 82-2: 1970-12; 1974-05; 1976-05; 1980-10; 1982-04; 1988-03; 1998-10; 2000-08

Changes

The following changes were made to the version of August 2000:

a) Company Standard 8202, version of March 1988, was revised and issued separately as CS 8202-2 for

ferritic steel.

b) DIN standards updated.