控制阀标准汇总

慧聪网 2006年2月20日9时3分信息来源：慧聪网水工业行业频道网

友评论 0 条进入论坛

标准编号标准中文名称标准英文名称

GB/T13852-1992 船用液压控制阀技术

条件General specification of hydraulic control valves for ship

GB/T17490-1998 液压控制阀油口、底

板、控制装置和电磁铁

的标识Hydraulic fluid

power--Identification of valve ports,subplates,control devices and solenoids

GB/T15623.1-2003 液压传动电调制液压

控制阀第1部分：四

通方向流量控制阀试

验方法Hydraulic fluid

power-Electrically modulated hydraulic control valves-Part 1:Test methods for four-way directional flow control valves

GB/T15623.2-2003 液压传动电调制液压

控制阀第2部分：三

通方向流量控制阀试

验方法Hydraulic fluid

power-Electrically modulated hydraulic control valves-Part 2:Test methods for three-way directional flow control valves

GB/T17213.7-1998 工业过程控制阀第7部

分: 控制阀数据单Industrial-process control valves Part 7: Control valve data sheet

GB/T17213.8-1998 工业过程控制阀第8部

分: 噪声的考虑第1

节: 实验室内测量空

气动力流流径控制阀

产生的噪声Industrial-process control valves Part 8: Noise considerations Section 1: Laboratory measurement of noise generated by aerodynamic flow through control valvesGB/T17213.1-1998 工业过程控制阀第1部

分: 控制阀术语和总

则Industrial--Process control valves Part 1: Control valve terminology and general considerations

GB/T17213.5-1998 工业过程控制阀第5部

分: 标志Industrial-process control valves Part 5: Marking

GB/T2514-1993 四油口板式液压方向

控制阀安装面Hydraulic fluid

power--Four-port directional control valves--Mounting surfaces

GB/T8104-1987 流量控制阀试验方法Hydraulic fluid

power--Valves--Testing method

of flow control valves

GB/T7940.3-2001 气动五气口方向控制

阀第三部分: 功能识

别编码体系Pneumatic fluid

power--Five-port directional control valves--Part 3: Code system for communication of valve functions

GB/T8106-1987 方向控制阀试验方法Hydraulic fluid

power--Valves--Testing method

of directional control valves

GB/T7940.2-2001 气动五气口方向控制

阀第二部分带电气接

头的安装面Pneumatic fluid

power--Five-port directional control valves--Part 2: Mounting interface surfaces with optional elettrical connector

GB/T8105-1987 压力控制阀试验方法Hydraulic fluid

power--Valves--Testing method

of pressure control valves

GB/T7940.1-2001 气动五气口方向控制

阀第一部分: 不带电

气接头的安装面Pneumatic fluid

power--Five-port directional control valves--Part 1: Mounting interface surfaces without electrical connectorGB/T8100-1987 板式联接液压压力控

制阀(不包括溢流阀)

顺序阀、卸荷阀、节流

阀和单向阀安装面Hydraulic fluid power--Pressure control valves (excluding pressure relief valves ), sequence valves, unloading valves, throttle valves and check valves--Mounting surfaces

GB/T8098-2003 液压传动带补偿的流

量控制阀安装面Hydraulic fluid

power--Compensated flow control valves--Mounting surfaces

JB/T7387-1994(2005复审) 工业过程控制系统用电动控制阀

NF C46-520-1993 工业过程控制阀.第8

部分:噪声问题.第2

节:通过控制阀的液压

流动产生的噪声的实

验室测量(Industrial-process control valves. Part 8 : noise considerations. Section 2 : laboratory measurement of noise generated by hydrodynamic flow through control valves.)

NF C46-522-1994 工业处理控制阀.第8

部分:噪声条款.第4

节:液压流动产生的噪

声预定(EN 534-8-4) (Industrial-process control valves. Part 8 : noise considerations. Section 4 : prediction of noise generated by hydrodynamic flow.)

NF E49-080-1-2002 气压液动.五通定向控

制阀.第1部分:不带电

连接器的安装接口(Pneumatic fluid power -

Five-port directional control valves - Part 1 : mounting interfaces without electrical connector.)

NF E49-080-2-2002 气压液动.五通方向控

制阀.第2部分:任选电

气连接器的安装接口

面(Pneumatic fluid power -

Five-port directional control valves - Part 2 : mounting interface surfaces with optional electrical connector.)

NF C46-505-1998 绝缘过程控制阀.第

2-3部分:流量容量.试(Industrial-process control valves. Part 2-3 : flow capacity.验过程Test procedures.)

NF C46-630-1998 工业过程控制阀.第6

部分:控制阀与定位器

连接用安装细节.第1

节:线性传动装置上安

装的定位器(Industrial-process control valves. Part 6 : mounting details for attachment of positioners to control valves. Section 1 : positioner mounting on linear actuators.)

NF E29-453-2000 工业过程控制阀门(Industrial process control

valves.)

标准编号标准中文名称标准英文名称

NF

E29-316-5-2 001 供水用阀门.适用性要求

和专用检查试验.第5部

分:控制阀门

(Valves for water supply - Fitness

for purpose requirements and

appropriate verification tests -

Part 5 : control valves.)

NF

C46-521-200 1 工业过程控制阀.第8部

分:噪声问题.第3节:气

动控制阀噪声预测法

(Industrial-process control valves -

Part 8-3 : noise considerations -

Control valves aerodynamic noise

prediction method.)

NF

E48-435-199 8 液压传动.尺寸02、03和

05的四端口模式排气阀

和四端口方向控制阀.夹

紧尺寸

(Hydraulic fluid power. Four-port

modular stack valves and four-port

directional control valves, sizes

02, 03 and 05. Clamping dimensions.)

NF

C46-519-200 1 工业过程控制阀.第8部

分:噪声考虑.第1节:实

验室测量气动流经控制阀

产生的噪声

(Industrial-process control valves -

Part 8 : noise considerations -

Section 1 : laboratory measurement of

noise generated by aerodynamic flow

through control valves.)

NF

C46-531-200 1 工业过程控制阀.第6-2

部分:定位器装到控制阀

的安装细则.旋转传动装

置上安装的定位器

(Industrial-process control valves -

Part 6-2 : mounting details for

attachment of positioners to control

valves - Positioner mounting on

rotary actuators.)

NF

E49-091-200气压传动.控制阀和其它

部件的孔口和控制机械的

(Pneumatic fluid power -

Identification of ports and control2 验证mechanisms of control valves and

other components.)

XP

E29-140-199 9 使用气体燃料的家用装置

的控制阀.安全控制阀(带

有集中自动密闭器的)

(Control cocks for household

appliances using gaseous fuels -

Safety cocks (with integrated

automatic obturator).)

NF

C46-510-200 1 工业过程控制阀.第3-1

部分:尺寸.双通球型直立

式控制法兰阀门的面对面

尺寸和双通球型角度控制

法兰阀门的中心

(Industrial-process control valves -

Part 3-1 : dimensions - Face-to-face

dimensions for flanged, two-way,

globe-type, straight pattern and

centre-to-face dimensions for

flanged, two-way, globe-type, a)

NF

C46-511-200 1 工业过程控制阀.第3-2

部分:尺寸.蝶阀除外的旋

转控制阀门的面对面尺寸

(Industrial-process control valves -

Part 3-2 : dimensions - Face-to-face

dimensions for rotary control valves

except butterfly valves.)

NF

E49-090-2-2 003 气压传动.18mm和26mm五

气口方向控制阀.第2部

分:带光学电接头的安装

面

(Pneumatic fluid power - Five-port

directional control valves, sizes 18

mm and 26 mm - Part 2 : mounting

interfaces with optional electrical

connector.)

NF

C46-512-199 9 工业处理控制阀.第3-3

部分:尺寸.对焊接的头尾

相接尺寸.两接头球型直

接式控制阀(欧洲标准EN

60534-3-3)

(Industrial-process control valves.

Part 3-3 : dimensions. End-to-end

dimensions for buttweld, two-way,

globe-type, straight pattern control

valves.)

ANSI/IEEE 1290-1996 核发电站电动控制阀门马

达应用、防护、控制和试

验指南

(Guide for MOV (Motor-Operated

Valve) Motor Application,

Protection, Control, and Testing in

Nuclear Power Generating Stations)

ANSI/FCI 87-2-1990 弹簧模板驱动控制阀动力

信号标准

(Power Signal Standard for

Spring-Diaphragm Actuated Control

Valves)

ANSI/ISA 无凸缘的控制阀端面间的(Face-to-Face Dimensions for

75.08.02-2003 尺寸(级别150、300和

600) Flangeless Control Valves (Classes 150, 300, and 600) )

ANSI/ISA S 75.08.03-2001

承插焊接端头和螺旋端头球状控制阀的面到面尺寸 (Face-to-Face Dimensions for Socket Weld-End and Screwed-End Globe-Style Control Valves (ANSI Classes 150, 300, 600, 900, 1500, and 2500)) ANSI/ISA

75.08.06-2002

带凸缘的球型控制阀体的面对面尺寸(类型900、1500和2500) (Face-to-Face Dimensions for Flanged Globe-Style Control Valve Bodies (Classes 900, 1500, and 2500) ) ANSI/ISA

75.08.05-2002

端头对焊球型控制阀的面对面尺寸(类型150、300、600、900、1500和2500) (Face-to-Face Dimensions for Buttweld-End Globe-Style Control Valves (Classes 150, 300, 600, 900, 1500, and 2500) ) ANSI/ISA

75.01.01-20

02

尺寸控制阀用流量方程式 (Flow Equations for Sizing Control Valves ) ANSI/ISA

75.08.01-2002 整体式带凸缘的球型控制阀体的面对面尺寸(类型125、150、250、300和600) (Face-to-Face Dimensions for Integral Flanged Globe-Style Control Valve Bodies (Classes 125, 150, 250,

300, and 600) )

ANSI/ISA S 75.19.01-20

01

控制阀的静水试验

(Hydrostatic Testing of Control Valves) ANSI/ISA S 75.08.04-2001

对焊端头球状控制阀的面到面尺寸

(Face-to-Face Dimensions for Buttweld-End Globe-Style Control Valves) ANSI/ISA S 75.08.07-2001 法兰球状控制阀的面到面尺寸

(Face-to-Face Dimensions for Separable Flanged Globe-Style Control Valves (Classes 150, 300, and

600))

ANSI/(NFPA) T 3.5.14

R1-1997 液力传动.直接控制阀门.分界特性的测定方法 (Hydraulic Fluid Power - Directional Control Valve - Method for Determining the Metering

Characteristics)

ANSI/(NFPA) T 3.21.8-1990

气压液动.反应时间的测量.直接控制阀门 (Pneumatic Fluid Power - Measurement of Response Time - Directional

Control Valves) ANSI/ISA S 75.15-1993 对焊端球状控制阀的面对面尺寸(ANSI 等级150、300、600、900、1500、2500) (Face-to-Face Dimensions for Buttweld-End Globe-Style Control

Valves (ANSI Classes 150, 300, 600,

900, 1500, and 2500))

标准编号

标准中文名称 标准英文名称 ANSI/FCI

91-1-1997

控制阀门密封的质量标准 (Standard for Qualification of

Control Valve Stem Seals) ANSI/UL

753-1996 消防装置用自动供水控制阀的警报附件

(Alarm Accessories for Automatic Water-Supply Control Valves for Fire-Protection Service) BS EN

60534-2-5-2003 工业过程控制阀.流通能力.通过有段间恢复功能的多段控制阀的流体流量的校准公式

(Industrial-process control valves -Flow capacity - Sizing equations for fluid flow through multistage

control valves with interstage recovery) ASTM F 1985-1999 气力操作的球形控制阀标准规范 (Standard Specification for

Pneumatic-Operated, Globe-Syle,

Control Valves)

BS EN

60534-3-2-2001

工业过程控制阀.尺寸.蝶形阀除外的转式控制阀的端面距 (Industrial-process control valves -Dimensions - Face-to-face dimensions for rotary control valves except butterfly valves) BS ISO

15407-2-2003 气压传动.五气口方向控制阀,规格18mm 和26mm.有任选电接头的安装接口 (Pneumatic fluid power - Five-port directional control valves, sizes 18 mm and 26 mm - Mounting interface

surfaces with optional electrical

connector)

BS ISO 12238-2001 气压液动.方向控制阀门.转换时间的测量 (Pneumatic fluid power - Directional

control valves - Measurement of

shifting time)

BS ISO 5599-1-2001 气压液动.五通方向控制阀.不带电连接器的安装接口表面 (Pneumatic fluid power - Five-port

directional control valves -

Mounting interface surfaces without

electrical connector) BS ISO 5599-2-2001 气压液动.五通方向控制阀.任选电气连接器的安装接口面 (Pneumatic fluid power - Five-port

directional control valves -

Mounting interface surfaces with

optional electrical connector) BS EN

60534-6-2-2001 工业过程控制阀.定位器装到控制阀的安装细则.旋转传动装置上安装的定位器 (Industrial-process control valves -Mounting details for attachment of

positioners to control valves -

Positioner mounting on rotary

actuators) BS EN 1074-5-2001 供水阀门.适用性和专用要求的试验.控制阀门

(Valves for water supply - Fitness

for purpose requirements and

appropriate verification tests -

Control valves) BS EN

60534-8-3-2000

工业流程控制阀.噪声问题.控制阀的空气动力噪声预报法 (Industrial-process control valves -Noise considerations - Control valve aerodynamic noise prediction method)BS EN

60534-2-3-1998

工业过程控制阀.流量.试验程序 (Industrial-process control valves -Flow capacity - Test procedures) BS EN

60534-8-1-2001 工业过程控制阀.噪声问题.通过控制阀的动力噪声的实验室测量 (Industrial-process control valves -Noise considerations - Laboratory

measurement of noise generated by

aerodynamic flow through control

valves) BS EN

60534-3-1-2000 工业过程控制阀.尺寸.带法兰的两路、球型、直立式控制阀门的面对面尺寸和带法兰的两路、球型、角度控制阀门 (Industrial-process control valves -Dimensions - Face-to-face dimensions for flanged, two-way, globe-type,

straight pattern and centre-to-face

dimensions for flanged, two-way,

globe-type, angle patter)

BS EN

1349-2000

工业处理控制阀门 (Industrial process control valves)BS ISO

15407-1-2000 18mm 和26mm 五气口气动方向控制阀.无电插头的安装界面 (Pneumatic fluid power - Five-port directional control valves, sizes 18

mm and 26 mm - Mounting interface

surfaces without electrical

connector) BS ISO 11727-1999 气动流体力学.控制阀和其它元件的控制机械装置和气门的识别 (Pneumatic fluid power -

Identification of ports and control

mechanisms of control valves and

other components) BS EN

60534-3-3-1998

工业过程控制阀.尺寸.对接焊接,两向,球型,垂直模式控制阀的末端对末端尺寸 (Industrial-process control valves -Dimensions - End-to-end dimensions for buttweld, two-way, globe-type, straight pattern control valves) BS EN

60534-2-1-1999

工业过程控制阀 .流容.安装条件下液流规模方程 (Industrial-process control valves -Flow capacity - Flow capacity - Sizing equations for fluid flow under installed conditions) BS ISO 6263-1997 液压传动.补偿式流量控制阀.装配面

(Hydraulic fluid power - Compensated

flow-control valves - Mounting

surfaces) BS ISO

10770-2-1998 液压传动.电模式液压控制阀.第2部分:三向流动控制阀的试验方法 (Hydraulic fluid power - Electrically modulated hydraulic

control valves - Test methods for

three-way directional flow control

valves) BS ISO

10770-1-1998 液压传动.电模式液压控制阀.第1部分:四向流动控制阀的试验方法 (Hydraulic fluid power - Electrically modulated hydraulic

control valves - Test methods for

four-way directional flow control

valves) BS EN 60534-6-1-1工业过程控制阀 .控制阀调节器连接用安装元件.(Industrial-process control valves -Mounting details for attachment of

安装positioners to control valves - Positioner mounting on linear actuators)

BS ISO 7790-1998 液压传动.规格为03和05

型的四油口标准设计叠阀

和四油口定向控制阀.紧

固尺寸

(Hydraulic fluid power - Four-port

modular stack valves and four-port

directional control valves, sizes

02, 03 and 05 - Clamping dimensions)

标准编号标准中文名称标准英文名称

EN 60534-8-1-2000 工业过程控制阀

第8部分：噪声的

考虑第1节：气

动流流径控制阀

产生的噪声的实

验室测量Industrial-process control valves - Part 8: Noise consideration; Section 1: Laboratory measurement of noise generated by hydrodynamic aerodynamic flow through control valves (IEC 60534-8-1:1986)

EN 60534-8-4-1994 工业过程控制阀

第8部分：噪声问

题第4节：流动

产生的噪声的预

测Industrial-process control valves - Part 8: Noise considerations - Section 4: Prediction of noise generated by hydrodynamic flow (IEC 60534-8-4:1994)

EN 60534-8-3-2000 工业流程控制

阀.第8-3部分

噪声问题通过

控制阀的动力噪

声预测法Industrial-process control valves - Part 8-3: Noise considerations; Control valve aerodynamic noise prediction method (IEC

60534-8-3:2000)

EN 1074-5-2001 供水阀门目的要

求的适应性和合

适的认证试验第

5部分：控制阀门Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 5: Control valves

EN 60534-3-1-2000 工业过程控制阀

第３－１部分：尺

寸法兰双通球

形直型控制阀的

端面间距尺寸和

有法兰双通球型Industrial-process control valves - Part 3-1: Dimensions -

Face-to-face dimensions for flanged, two-way, globe-type, straight pattern and

centre-to-face dimensions for角型控制阀的flanged, two-way, globe-type,

angle pattern control valves (IEC

60534-3-1:2000)

EN 60534-2-1-1998 工业过程控制阀

第2－1部分：流

通能力安装条

件下流体流量的

校准公式Industrial-process control valves - Part 2-1: Flow capacity - Sizing equations for fluid flow under installed conditions (IEC

60534-2-1:1998)

EN 60534-1-1993 工业过程控制阀

第1部分控制

阀术语和一般考

虑Industrial-process control valves - Part 1: Control valve terminology and general considerations (IEC 60534-1:1987)

EN 60534-3-2-2001 工业过程控制阀

第３部分：尺寸

第２节：无法兰控

制阀（薄型蝶阀除

外）的端面间距尺

寸Industrial-process control valves - Part 3-2: Dimensions -

Face-to-face dimensions for rotary control valves except butterfly valves (IEC

60534-3-2:2001)

EN 60534-3-3-1998 工业过程控制阀

第三部分：尺寸

对接焊接两向

球型垂直模式

控制阀的末端对

末端尺寸Industrial-process control valves - Part 3-3: Dimensions -

End-to-end dimensions for buttweld, two-way, globe-type, straight pattern control valves (IEC 60534-3-3:1998)

EN 60534-6-1-1997 工业过程控制阀

第6－1部分：定

位器联到控制阀

执行机构的安装

细则第1节：直

线传动装置上调

节器的安装Industrial-process control valves - Part 6: Mounting details for attachment of positioners to control valves - Section 1: Positioner mounting on linear actuators (IEC 60534-6-1:1997)

EN 60534-6-2-2001 工业过程控制阀

第6－2部分：定

位器联到控制阀Industrial-process control valves - Part 6-2: Mounting details for attachment of positioners to执行机构的安装细则环形执行机构定位器control valves; Positioner mounting on rotary actuators (IEC 60534-6-2:2000)

EN 60534-8-2-1993 工业过程控制阀

第8部分噪声

考虑第2节通

过控制阀的流体

产生的噪声的实

验室测量报法Industrial-process control valves- Part 8: noise consideration- Section 2: laboratory measurement of noise generated by hydrodynamic flow through control valves (IEC 60534-8-2:1991)

EN 60534-2-3-1998 工业过程控制阀

第２部分：流通能

力第３节：试验

规程Industrial-process control valves - Part 2-3: Flow capacity - Test procedures (IEC 60534-2-3:1997)

prEN 13959-2000 公称压力在DN6

至DN250（含

DN250）的防污染

控制阀E族A、

B、C和D型Anti-pollution check valves DN 6 to DN 250 inclusive - Family E, type A, B, C and D

prEN 60534-4-1998 工业过程控制阀

第４部分：检验和

常规试验草案IEC 60534-4: Industrial-process control valves - Part 4: Inspection and routine testing

EN

1349-2000+AC-2001 工业加工控制阀

门

Industrial process control valves

EN 60534-2-5-2003 工业加工控制阀

第2-5部分：流量

通过带级间恢复

多级控制阀的流

体尺寸方程Industrial-process control valves - Part 2-5: Flow capacity; Sizing equations for fluid flow through multistage control valves with interstage recovery (IEC

60534-2-5:2003) / Note: Endorsement notice

BS ISO 4401-1996 液压传动.四油口

定向控制阀.装配

面(Hydraulic fluid power - Four-port directional control valves - Mounting surfaces)

BS EN 60534-1-19 工业过程控制

阀 .第1部分:控

制阀术语和一般

考虑(Industrial-process control valves - Industrial-process control valves - Control valve terminology and general considerations)

BS EN 60534-8-4-1994 工业过程控制阀.

第8部分:噪声问

题.第4节.流动

产生的噪声的预

报(Industrial-process control valves - Noise considerations - Prediction of noise generated by hydrodynamic flow)

BS EN 60534-8-2-1991 工业过程控制阀.

第8部分:噪声考

虑.第2节:通过

控制阀的流体产

生的噪声的实验

室测量(Industrial-process control valves - Noise considerations - Laboratory measurement of noise generated by hydrodynamic flow through control valves)

BS 94-4-19 液压阀的安装面.

第4部分:03和05

规格的四孔组件

排气阀、模数组阀

和方向控制阀夹

紧尺寸规范(Hydraulic fluid power valve mounting surfaces - Specification for clamping dimensions of

four-part, size 03 and 05, modular stack valves and directional control valves)

BS 5793-4-1987 工业过程控制阀.

第4部分:检验和

例行试验规范(Industrial-process control valves - Specification for inspection and routine testing)

BS 5944-4-1984 液压动力系统和

部件所产生的空

气噪音的测量.第

4部分:流量和压

力控制阀声功率

级的测定方法(Measurement of airborne noise from hydraulic fluid power systems and components - Method of determining sound power levels from valves controlling flow and pressure)

BS 5793-5-1984 工业过程控制阀.

第5部分:标记规

范(Industrial-process control valves - Specification for marking)标准编号标准中文名称标准英文名称

BS 1655-1950 过程控制工业用

法兰连接自动控

制阀(面至面尺

寸)规范(Specification for flanged automatic control valves for the process control industry

(face-to-face dimensions))

DIN EN

60534-2-3-1998 工业过程控制阀.

第2-3部分:流

量.检验方法

(Industrial-process control

valves - Part 2-3: Flow capacity;

test procedures (IEC

60534-2-3:1997); German version

EN 60534-2-3:1998)

DIN EN

60534-6-1-1998 工业流程控制阀.

第6部分:调节阀

门驱动的位置调

节器固定用安装

细节.第1节:行

程驱动上位置调

节器的安装

(Industrial-process control

valves - Part 6: Mounting details

for attachment of positioners to

control valves - Section 1:

Postioner mounting on linear

actuators (IEC 60534-6-1:1997);

German version EN 60534-6-1:1997)

DIN EN 60534-1-1995 工业过程控制阀.

第1部分:控制阀

术语和一般原理(Industrial-process control valves - Part 1: Control valve terminology and general considerations (IEC

60534-1:1987); German version EN 60534-1:1993)

DIN IEC 60534-7-1992 工业过程控制阀.

第7部分:.数据

表(Industrial process control valves; control valve data sheet; identical with IEC 60534-7:19)

DIN IEC

60534-2-4-1990 工业过程控制阀.

第2部分:流通能

力.第4节:内在

的流动特性线和

调节比例关系

(Industrial-process control

valves; flow capacity; inherent

flow characteristics and

rangeability; identical with IEC

60534-2-4:19)

DIN EN

60534-8-2-1994 工业过程控制阀.

第8部分:噪声问

题.第2节:由通

(Industrial-process control

valves; part 8: noise

considerations; section 2:过控制阀的液力流产生的噪声的实验室测量laboratory measurement of noise generated by hydrodynamic flow through control valves (IEC 60534-8-2:1991); German version EN 60534-8-2:1993)

DIN EN

60534-8-4-1995 工业过程控制阀.

第8部分:噪声状

态.第4节.流动

产生的噪声的预

报

(Industrial-process control

valves - Part 8: Noise

considerations; section 4:

Prediction of noise generated by

hydrodynamic flow (IEC

60534-8-4:1994); German version

EN 60534-8-4:1994)

DIN EN

60534-3-1-2000 工业过程控制阀.

第3-1部分:尺

寸.双通球型直立

式控制法兰阀门

的面对面尺寸和

双通球型角度控

制法兰阀门的中

心

(Industrial-process control

valves - Part 3-1: Dimensions;

Face-to-face dimensions for

flanged, two-way, globe-type,

straight pattern and

centre-to-face dimensions for

flanged, two-way, globe-type,

angle pattern control valves (IEC

60534-3-1:2000); German version

EN 60534-3-1:2000 + Corrigendum

2000)

DIN 3394-3-2004 自动控制阀.第3

部分:压力为4巴

及以下的0级减

压安全阀(Automatic control valves - Part 3: Class 0 pressure relief, valves for pressure up to 4 bar)

DIN EN

60534-3-3-2000 工业过程控制阀.

第3-3部分:尺

寸.对头焊接的对

头尺寸,两种方

式,球型,直角型

控制阀门

(Industrial-process control

valves - Part 3-3: Dimensions -

end-to-end dimensions for

buttweld, two-way, globe-type,

straight pattern control valves

(IEC 60534-3-3:1998); German

version EN 60534-3-3:1998)DIN EN

60534-2-1-2000 工业过程控制阀.

第2-1部分:流动

容量.在安装条件

下流体流动的尺

寸方程

(Industrial-process control

valves - Part 2-1: Flow capacity;

sizing equations for fluid flow

under installed conditions (IEC

60534-2-1:1998); German version

EN 60534-2-1:1998)

DIN EN 1074-5-2001 供水阀门.适用性

要求和适配试验.

第5部分:控制阀

门(Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 5: Control valves; German version EN 1074-5:2001)

DIN EN 12334-2001 工业阀门.铸铁控

制阀门(Industrial valves - Cast iron check valves; German version EN 12334:2001)

DIN EN

60534-8-3-2001 工业过程控制阀.

第8-3部分:噪声

问题.控制阀空气

动力噪声预测法

(Industrial-process control

valves - Part 8-3: Noise

considerations; Control valve

aerodynamic noise prediction

method (IEC 60534-8-3:2000);

German version EN 60534-8-3:2000)

DIN IEC 60534-5-1984 工业过程控制阀.

第5部分:标记(Industrial-process control valves; part 5: marking)

DIN EN

60534-6-2-2001 工业过程控制阀.

第6-2部分:定位

器装到控制阀上

的安装细则.旋转

传动装置上安装

的定位器

(Industrial-process control

valves - Part 6-2: Mounting

details for attachment of

positioners to control valves -

Positioner mounting on rotary

actuators (IEC 60534-6-2:2000);

German version EN 60534-6-2:2001)

DIN EN 1349-2000 工业过程控制阀

门(Industrial process control valves; German version EN 1349:2000)

DIN EN

60534-8-1-2001 工业过程控制阀.

第8部分:噪声问

(Industrial-process control

valves - Part 8: Noise题.第1节:由通过控制阀的空气动力流产生的噪声的实验室测量considerations; Section 1: Laboratory measurement of noise generated by aerodynamic flow through control valves (IEC 60534-8-1:1986); German version EN 60534-8-1:2000)

DIN ISO 15407-1-2003 气压传动.五气口

方向控制阀、规格

18mm和26mm.第1

部分:无电气接头

的安装面(Pneumatic fluid power - Five-port directional control valves, sizes 18 mm and 26 mm - Part 1: Mounting interface surfaces without electrical connector (ISO

15407-1:2000))

DIN ISO 5599-1-1998 气压液动.五通方

向控制阀.第1部

分:不带电连接件

的安装接口表面(Pneumatic fluid power - Five-port directional control valves - Part 1: Mounting interface surfaces without electrical connectors (ISO 5599-1:19))

DIN EN

60534-3-2-2002 工业过程控制阀.

第3-2部分:尺

寸.无法兰控制阀

(薄型蝶阀除外)

的端面间距尺寸

(IEC60534-3-2:2

001)

(Industrial-process control

valves - Part 3-2: Dimensions;

Face-to-face dimensions for

rotary control valves except

butterfly valves (IEC

60534-3-2:2001); German version

EN 60534-3-2:2001)

IEC 60534-3-2-2001 工业过程控制阀.

第3-2部分:尺

寸.蝶形阀除外的

转式控制阀的端

面距(Industrial-process control valves - Part 3-2: Dimensions; Face-to-face dimensions for rotary control valves except butterfly valves)

IEC 60534-2-5-2003 工业过程控制阀.

第2-5部分:流通

能力.通过有段间

恢复能力的多段

控制阀门的流体(Industrial-process control valves - Part 2-5: Flow capacity; Sizing equations for fluid flow through multistage control valves with interstage recovery)流量的校准公式

IEC 60534-5-1982 工业过程控制阀.

第5部分:标志(Industrial-process control valves. Part 5 : Marking)

标准编号标准中文名称标准英文名称

IEC 60534-2-1-1998 工业过程控制阀.

第2-1部分:流

量.安装条件下流

体流量的校准公

式(Industrial-process control valves - Part 2-1: Flow capacity - Sizing equations for fluid flow under installed conditions)

IEC 60534-8-4-1994 工业过程控制阀.

第8部分:噪声状

态.第4节.流动

产生的噪声的预

报(Industrial-process control valves - Part 8: Noise considerations - Section 4: Prediction of noise generated by hydrodynamic flow)

JIS B8656-2002 比例电动液压旁

通流量控制阀试

验方法(Test methods for

electro-hydraulic proportional bypass flow control valves)

JIS B8654-2002 比例电动液压串

联型流量控制阀

试验方法(Test methods for

electro-hydraulic proportional series flow control valves)

JIS B8657-2002 比例电动液压定

向旁通流量控制

阀试验方法(Test methods for

electro-hydraulic proportional directional bypass flow control valves)

JIS B8659-2-2002 液压传动.电气调

节液压控制阀门.

第2部分:三路定

向流量控制阀门

的试验方法(Hydraulic fluid power -- Electrically modulated hydraulic control valves -- Part 2: Test methods for three-way directional flow control valves)

UL 429-1999 电动控制阀(Electrically operated valves )

UL 753-1995 消防装置用自动

供水控制阀报警

附件(Alarm accessories for automatic water-supply control valves for fire protection service )

UL 1468-1995 防火设备用直接

控制的减压阀和

压力控制阀(Direct acting pressure reducing and pressure restricting valves )

UL 1739-1994 消防设备用液压

控制的压力控制

阀(Pilot-operated pressure-control valves for fire-protection service )

JIS B8655-2002 比例电动液压串

联型定向流量控

制阀试验方法(Test methods for

electro-hydraulic proportional directional series flow control valves)

JIS B8375-3-2000 气动液压.五孔定

向控制阀.第3部

分:阀功能通讯的

密码系统(Pneumatic fluid power --

Five-port directional control valves -- Part 3: Code system for communication of valve functions)

JIS B8375-1-2000 气动液压.五孔定

向控制阀.第1部

分:无电接头的安

装界面(Pneumatic fluid power -- Five-port directional control valves -- Part 1: Mounting interface surface without electrical connector)

JIS B8357-2000 液压传动., , ,

补偿式流量控制

阀.装配面(Hydraulic fluid power -- Compensated flow-control valves -- Mounting surfaces)

JIS B8400-1-2003 气压传动.尺寸为

18mm-26mm的五孔

定向控制阀.第1

部分:无电连接件

的安装接口表面(Pneumatic fluid power --

Five-port directional control valves, sizes 18 mm and 26 mm -- Part 1: Mounting interface surfaces without electrical connector)

JIS F3024-1996 造船.控制阀用舱

面支座(Shipbuilding -- Deck stands for controlling valves)

JIS B8658-19 比例电动液压控

制阀用电力放大

器规则(Rules of electronic amplifier for electro-hydraulic control valves)

JIS B8380-2002 气压液动.控制阀(Pneumatic fluid power --门和其他元部件出口和控制机构的鉴定Identification of ports and control mechanisms of control valves and other components)

JIS B8376-1994 气动速度控制阀(Speed control valves for

pneumatic use)

JIS B8387-2000 液压动力.四孔调

节阀门和四孔方

向控制阀

门.02,03,05尺

寸.夹持尺寸(Hydraulic fluid power --

Four-port modular stack valves and four-port directional control valves, sizes 02, 03 and 05 -- Clamping dimensions)

JIS B8375-2-2000 气动液压.五孔定

向控制阀.第2部

分:带备用电接头

的安装界面(Pneumatic fluid power --

Five-port directional control valves -- Part 2: Mounting interface surface with optional electrical connector)

JIS B86-2001 液压动力.压力控

制阀(不包括减压

阀)、顺序活门、

释荷阀、节流阀和

止回阀.安装表面(Hydraulic fluid power -- Pressure-control valves (excluding pressure-relief valves), sequence valves, unloading valves, throttle valves and check valves -- Mounting surfaces)

JIS B8659-1-2000 液压动力.电气调

节液压控制阀门.

第1部分:四路直

流控制阀门的试

验方法(Hydraulic fluid power -- Electrically modulated hydraulic control valves -- Part 1: Test methods for four-way directional flow control valves)

JIS B2007-1993 工业过程控制阀.

检验和常规试验(INDUSTRIAL-PROCESS CONTROL VALVES - INSPECTION AND ROUTINE TESTING)

ISO 10770-2-1998 液压传动.电模式

液压控制阀.第2

部分:三向流动控

制阀的试验方法(Hydraulic fluid power - Electrically modulated hydraulic control valves - Part 2: Test methods for three-way directionalflow control valves)

ISO 5599-3-1990 气压传动.五口控

制阀.第3部分:

阀门功能交换的

编码体系(Pneumatic fluid power; five-port directional control valves; part 3: code system for communication of valve functions)

ISO 7790-1997 液压传动.规格为

03和05型的四油

口标准设计叠阀

和四油口定向控

制阀.紧固尺寸(Hydraulic fluid power - Four-port modular stack valves and four-port directional control valves, sizes 02, 03 and 05 - Clamping dimensions)

ISO 11727-1999 气流动力.控制阀

和其它元件的控

制机械装置和气

门的识别(Pneumatic fluid power - Identification of ports and control mechanisms of control valves and other components)

ISO 5599-2-2001 气压液动.五通方

向控制阀.第2部

分:任选电气连接

器的安装接口面(Pneumatic fluid power - Five-port directional control valves - Part 2: Mounting interface surfaces with optional electrical connector)

ISO 15407-1-2000 18mm和26mm五气

口气动方向控制

阀.第1部分:无

插头安装界面(Pneumatic fluid power - Five-port directional control valves, sizes 18 mm and 26 mm - Part 1: Mounting interface surfaces without electrical connector)

ISO 6263-1997 液压传动.补偿式

流量控制阀.装配

面(Hydraulic fluid power - Compensated flow-control valves - Mounting surfaces)

ISO 4401-1994 液压传动.四油口

定向控制阀.装配

面(Hydraulic fluid power - Four-port directional control valves - Mounting surfaces)

ISO 15407-2-2003 气压传动.五气口

方向控制阀,规格

18mm和26mm.第2

部分:可任选连接(Pneumatic fluid power - Five-port directional control valves, sizes 18 mm and 26 mm - Part 2: Mounting interface surfaces with optional器的安装接口electrical connector)

ISO 5599-1-2001 气压液动.五通定

向控制阀.第1部

分:不带电连接器

的安装接口表面(Pneumatic fluid power - Five-port directional control valves - Part 1: Mounting interface surfaces without electrical connector)

ISO 12238-2001 气压液动.方向控

制阀门.转换时间

的测量(Pneumatic fluid power - Directional control valves - Measurement of shifting time)

ISO 10770-1-1998 液压传动.电模式

液压控制阀.第1

部分:四向流动控

制阀的试验方法(Hydraulic fluid power - Electrically modulated hydraulic control valves - Part 1: Test methods for four-way directional flow control valves)

IEC 60534-8-3-2000 工业过程控制阀.

第8-3部分:噪声

的考虑.控制阀的

气动噪声预测法(Industrial-process control valves - Part 8-3: Noise considerations; Control valve aerodynamic noise prediction method)

IEC 60534-8-2-1991 工业过程控制阀.

第8部分:噪声问

题.第2节:由通

过控制阀的液力

流产生的噪声的

实验室测量(Industrial-process control valves; part 8: noise considerations; section 2: laboratory measurement of noise generated by hydrodynamic flow through control valves)

IEC 60534-2-3-1997 工业过程控制阀.

第2-3部分:流通

能力.试验规程(Industrial-process control valves - Part 2-3: Flow capacity - Test procedures)

IEC 60534-8-1-1986 工业过程控制阀.

第8部分:噪声的

考虑.第1节:流

经控制阀的气动

流产生的噪声的

实验室测量(Industrial-process control valves. Part 8 : Noise considerations. Section one - Laboratory measurement of noise generated by aerodynamic flow through control walves)

IEC 60534-3-3-1998 工业过程控制阀.(Industrial-process control第3部分:尺寸.对接焊的两向阀,球型阀,直接图形控制阀的首尾相接尺寸valves - Part 3-3: Dimensions - End-to-end dimensions for buttweld, two-way, globe-type, straight pattern control valves)

IEC 60534-6-1-1997 工业过程控制阀.

第6部分:定位器

装到控制驱动器

的安装细则.第1

节:线型致动器上

定位器安装(Industrial-process control valves - Part 6: Mounting details for attachment of positioners to control valves - Section 1: Positioner mounting on linear actuators)

IEC 60534-3-1-2001 工业过程控制阀.

第3-1部分:尺

寸.法兰面对面尺

寸,两路,直型和

法兰中心对面尺

寸,两路,球形,角

型控制阀门(Industrial-process control valves - Part 3-1: Dimensions; Face-to-face dimensions for flanged, two-way, globe-type, straight pattern and

centre-to-face dimensions for flanged, two-way, globe-type, angle pattern control valves)

IEC 60534-6-2-2000 工业过程控制阀.

第6-2部分:定位

器联接到控制阀

的安装细则.环行

执行机构定位器(Industrial-process control valves - Part 6-2: Mounting details for attachment of positioners to control valves; Positioner mounting on rotary actuators)

IEC 60534-3-1976 工业过程控制阀.

第3部分:尺寸.

第1节:二通球形

控制阀的法兰端

面距(Industrial-process control valves. Part 3 : Dimensions. Section One: Face-to-face dimensions for flanged, two-way, globe-type control valves.)

IEC 60534-1-1987 工业过程控制阀.

第1部分:控制阀

术语和一般原理(Industrial-process control valves. Part 1: Control valve terminology and general considerations.)IEC 60534-2-4-19 工业过程控制阀.

第2部分:流通能

力.第4节:天然

流动特性和量程

范围(Industrial-process control valves; part 2: flow capacity; section four: inherent flow characteristics and rangeability)

IEC 60534-7-19 工业过程控制阀.

第7部分:数据表(Industrial-process control valves; part 7: control valve data sheet)

IEC 60534-4-1999 工业过程控制阀.

第4部分:检验和

常规试验(Industrial-process control valves - Part 4: Inspection and routine testing)

QC/T305-1999(2005复审) 汽车动力转向控制阀总成技术条件

标准编号标准中文名称标准英文名称

QC/T306-1999(2005复审) 汽车动力转向控制阀总成台架试验方法

GB/T17213.12-2005 工业过程控制阀

第3-3部分：尺寸

对焊式两通球形

直通控制阀的端

距

GB/T17213.4-2005 工业过程控制阀

第4部分：检验和

例行试验

GB/T17213.6-2005 工业过程控制阀

第6-1部分：定位

器与控制阀执行

机构连接的安装

细节定位器在直

行程执行机构上

的安装

GB/T17213.13-2005 工业过程控制阀

第6-2部分：定位

器与控制阀执行

机构连接的安装

细节定位器在角

行程执行机构上

的安装

GB/T17213.14-2005 工业过程控制阀

第8-2部分：噪声

的考虑实验室

内测量液动流流

经控制阀产生的

噪声

GB/T17213.15-2005 工业过程控制阀

第8-3部分：噪声

的考虑空气动力

流流经控制阀产

生的噪声预测方

法

GB/T17213.16-2005 工业过程控制阀

第8-4部分：噪声

的考虑液动流流

经控制阀产生的

噪声预测方法GB/T17213.2-2005 工业过程控制阀

第2-1部分：流通

能力安装条件下

流体流量的计算

公式

GB/T17213.9-2005 工业过程控制阀

第2-3部分：流通

能力试验程序GB/T17213.10-2005 工业过程控制阀

第2-4部分：流通

能力固有流量特性和可调比

GB/T17213.3-2005 工业过程控制阀

第3-1部分：尺寸

两通球形直通控

制阀法兰端面距

和两通球形角形

控制阀法兰中心

至法兰端面

GB/T17213.11-2005 工业过程控制阀

第3-2部分：尺寸

角行程控制阀(蝶

阀除外)的端面距

MT/T765-1997(2005复审) 液压支架用自动喷雾控制阀通用技术条件