1N4002

1N4004, 1N4005, 1N4006,

1N4007

1N4004 and 1N4007 are Preferred Devices

Axial Lead Standard Recovery Rectifiers

This data sheet provides information on subminiature size, axial lead mounted rectifiers for general−purpose low−power applications. Features

•Shipped in plastic bags, 1000 per bag

•Available Tape and Reeled, 5000 per reel, by adding a “RL” suffix to the part number

•Available in Fan−Fold Packaging, 3000 per box, by adding a “FF”suffix to the part number

•These devices are manufactured with a Pb−Free external lead

finish only*

Mechanical Characteristics

•Case: Epoxy, Molded

•Weight: 0.4 gram (approximately)

•Finish: All External Surfaces Corrosion Resistant and Terminal Leads are Readily Solderable

•Lead and Mounting Surface Temperature for Soldering Purposes: 220°C Max. for 10 Seconds, 1/16 in. from case

•Polarity: Cathode Indicated by Polarity Band

*For additional information on our Pb−Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D.

CASE 59−10

AXIAL LEAD

PLASTIC

LEAD MOUNTED RECTIFIERS

50−1000 VOLTS

DIFFUSED JUNCTION

Preferred devices are recommended choices for future use and best overall value.

MARKING DIAGRAM

See detailed ordering and shipping information on page 3 of this data sheet.

ORDERING INFORMATION

AL= Assembly Location

1N400x= Device Number

x= 1, 2, 3, 4, 5, 6 or 7

YY= Year

WW= Work Week

AL

1N

400x

YYWW

http://onsemi.comMAXIMUM RATINGS

values (not normal operating conditions) and are not valid simultaneously. If these limits are exceeded, device functional operation is not implied, damage may occur and reliability may be affected.

ELECTRICAL CHARACTERISTICS*

ORDERING INFORMATION

†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D.

PACKAGE DIMENSIONS

AXIAL LEAD CASE 59−10ISSUE S

DIM MIN MAX MIN MAX MILLIMETERS

INCHES A 4.10 5.200.1610.205B 2.00 2.700.0790.106D 0.710.860.0280.034F −−− 1.27−−−0.050K

25.40−−−

1.000−−−

NOTES:

1.DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 198

2.

2.CONTROLLING DIMENSION: INCH.

3.59−04 OBSOLETE, NEW STANDARD 59−09.

4.59−03 OBSOLETE, NEW STANDARD 59−10.

5.ALL RULES AND NOTES ASSOCIATED WITH JEDEC DO−41 OUTLINE SHALL APPLY

6.POLARITY DENOTED BY CATHODE BAND.

7.LEAD DIAMETER NOT CONTROLLED WITHIN F DIMENSION.

ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice

to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates,and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.

PUBLICATION ORDERING INFORMATION