| 供货单位 Supplier | 物料型号Model | XLCZ-FM-QA-008 料号P/N | |||||||||||||||
| 生产批次号Lot | 物料名称Designation | 送检数量Send the Qty | |||||||||||||||
| 检验数量Inspect Qty | 合格数量OK Qty | 检验员IQC | |||||||||||||||
| AQL 允收质量水平：CR=0.01Ac/Re= 抽检数量= MA=0.65 Ac/Re= 抽检数量= MI=2.5 抽检数量= Ac/Re= Acceptable quality level Sampling inspection Qty | |||||||||||||||||
| 检验项目Item | 检验内容Program of tests | 不良数 Defect Qty | 判定 Decide | 不良描述 NG Description | 缺陷等级 level | ||||||||||||
| CR | MA | MI | |||||||||||||||
| 包 装Packing | 产品防护 Product protection | 包装安全可靠，外箱不可有破损、变形、受潮。 The packing is safe and reliable. The outer case should not be damaged, deformed or dampened | |||||||||||||||
| 包装标识 Label on package | 外包装箱标识应有供应商名称、生产日期、合格标贴、规格型号、物料代码、数量。 来料名称应与系统物料名称一致。 Supplier name, production date, conformity label, specification and model, material code and quantity should be marked on the outer packing cases. The name of incoming material should be consistent with the name of system material | ||||||||||||||||
| 外观 Appearance | 色差 Aberration | 物体颜色要与封样样品一致，不允许出现色差不良。 The color of the object should be consistent with the sealed sample. Bad color is not allowed | |||||||||||||||
| 破损 Damaged | 定位柱及产品其它区域不能有破损。 The positioning column and other areas of the product shall not be damaged | ||||||||||||||||
| 流痕/水印 Stream mark/watermark | 物件表面及内部无明显的流痕及水印。 There is no obvious flow mark and watermark on the surface and inside of the object | ||||||||||||||||
| 流漆 Runs and Sags | 烤漆件表面及级面边口处，不能有流漆现象。 The surface of the baking varnish and the edge of grade surface at the mouth, there can be no flow of paint phenomenon | ||||||||||||||||
| 披锋Burr | 不允许有影响装配或伤手的批锋。 Do not allow battering edges that affect assembly or injured hands | ||||||||||||||||
| 脏污 Smudginess | 不允许有明显的脏污，可擦除的污迹允许有，但不能成批存在。 No visible smudges are allowed. Erasable smudges are allowed, but not in batches | ||||||||||||||||
| 丝印 Silk-screen | 文字印刷不得有漏印、断线、重影、粗细不均、溢墨、印偏、印斜等现象，文字颜色正确。 There shall be no missing, broken lines, double shadows, uneven thickness, ink overflow, deviation and deviation in printing. The color of the text shall be correct | ||||||||||||||||
| 尺寸Size | 序号NO. | 规格值Spec | ∙量测值Measurement Value | 判定 Decide | 不良描述 Defect description | 缺陷等级Grade | |||||||||||
| 1 | 2 | 3 | 4 | 5 | CR | MA | MI | ||||||||||
| Decide | □合格OK □ 不合格 NG □让步接收Accept on deviation | ||||||||||||||||
2.判定栏填写规定“√”代表合格； “∕”代表不适用于该产品，不进行该项检验； “╳”代表不合格。
3.Note: 1. This inspection report is applicable to the inspection of all plastic materials of Xinli.
2. Fill in the "√" in the judgment column to represent qualified; "/" does not apply to the product and does not carry out the test; 1, "I" means failing.
检验员IQC： 审核Audit： 批准Ratify：
Copyright © 2019-2025 51dongshi.net 版权所有
违法及侵权请联系：TEL:177 7030 7066 E-MAIL:11247931@qq.com 本站由北京市万商天勤律师事务所王兴未律师提供法律服务
