Synthesis of Exotic Zigzag ZnO Nanoribbons and The

Li Wang,†Kezheng Chen,*,†and Lifeng Dong †,‡

College of Materials Science and Engineering,Qingdao Uni V ersity of Science and Technology,Qingdao

266042,People’s Republic of China,and Department of Physics,Astronomy,and Materials Science,Missouri State Uni V ersity,Springfield,Missouri 65810,United States

Recei V ed:May 22,2010;Re V ised Manuscript Recei V ed:August 22,2010

ZnO nanoribbons with zigzag edges and ultrafine nanowire-like tips (diameter about 10nm)were synthesized via a facile method at a relatively low temperature without any catalysts or templates.The nanoribbons are about 30nm in thickness,500nm in length,and tapered in width.It is hydrogen peroxide that results in the formation of ZnO nanoribbons with zigzag edges.As an oxidant,hydrogen peroxide provides not only oxygen for the growth of ZnO nanoribbons but also water vapor for impeding the growth of the nanoribbons along

[0001]and accelerating the <011

j 0>growth of ZnO nanoribbons.Bottom-gate ZnO-nanoribbon-based field-effect transistors demonstrated n-type field-effect conduction,and the current on-to-off ratio was as high as 1×104.The novel method developed in this study can be used to synthesize other metal oxides with zigzag edges.

Introduction

In recent years,extensive theoretical and experimental research on ZnO nanostructures has been triggered by their potential application as building blocks for optoelectronic devices,sensors,field emission devices,and electrochromic displays.1-6Much work has been spent on selecting a desired synthesis method and controlling experimental parameters to obtain ZnO nanostructures with various and controllable mor-phologies.Metal -organic vapor-phase epitaxial growth,chemi-cal vapor deposition,thermal evaporation,electrochemical deposition,and lithographic techniques have been used to synthesize various types of ZnO nanostructures,such as multipeds;nanorods;nanonails;and tower-like,comblike,and hierarchical structures.7-13Among those nanostructures,one-dimensional (1D)structures are regarded as an ideal system for understanding their unique optical,thermal,and electrical properties.14ZnO nanowires/nanobelts,along with carbon nano-tubes and silicon nanowires,are considered the most important 1D nanomaterials as building blocks for nanoscale devices.15

Patterned and aligned nanowires (NWs)can be obtained by patterning catalytic particles,and the diameters of the nanowires can be controlled by the size of catalyst particles.16Without catalysts,the majority of NWs were greater than 50nm in size,and the NWs had hexagonal cross sections.17,18Recently,zigzag graphene nanoribbons have sparked significant interest toward zigzag nanostructures.19,20For instance,zigzag-shaped nano-structures of SnO 2and TiO x and other semiconductors have been reported.21-23Theoretical research on peculiar magnetic states at the edges of a zigzag ZnO nanoribbon has also encouraged the study of ZnO nanoribbons with different layers.24

By far,1D semiconductor NWs have been synthesized using chemical vapor deposition (CVD).25Experimental results dem-onstrated that a high temperature (>1000°C)is required for the CVD growth of ZnO nanowires while using ZnO powder as a precursor.Even via a carbothermal reduction of ZnO

powder,the reaction temperature is still as high as 800-900°C.26Besides growth temperatures,the CVD growth method also needs other controllable parameters,such as vacuum pressure,gas composition,and gas flow rates.Recent studies indicate that oxygen vacancies during the CVD process might produce active sites,and the active sites advance gas absorption of carbon dioxide,ethanol,methanol,and water molecules on nanowire surfaces 27,28in addition to active sites.Water vapor enhanced the crystallization of ZnO nanostructures.Inspired by these reports,we developed a two-step method using hydrogen peroxide (H 2O 2)as an oxygen source to synthesize zigzag ZnO nanostructures with exotic morphologies and investigated their optical and electrical properties.Experimental Section

The synthesis of ZnO nanostructures consists of two steps:thermal evaporation of zinc powder and the growth of ZnO nanostructures under a H 2O 2atmosphere.Both processes are carried out in a horizontal quartz tube furnace.

Thermal Evaporation of Zinc Powder.Metallic zinc powder (purity of 99.98%)was used as a source material to form a zinc seed film.A 1.0g portion of zinc powder was loaded in a ceramic boat at the center of the furnace.Glass slices or silicon substrates were put in the quartz tube along the downstream side of the flowing nitrogen with an approximate distance of 110mm to the center of the furnace.Prior to evaporation,high-purity nitrogen,used as a protective and carrier gas,was introduced into the quartz tube for 30min to remove oxygen inside.The furnace was heated to 550°C with a heating rate of 10°C/min,held at 550°C for 30min,and then cooled to room temperature under a nitrogen flow.

Growth of ZnO Nanostructures.Glass or silicon substrates coated with a zinc film were put in the middle of the furnace,and then a ceramic boat filled with 4mL of 30%H 2O 2and 6mL of distilled water was located at a region that is about 10cm away from the substrates.To avoid the introduction of impurities,the tube furnace was sealed and vacuumed.The tube was heated to 500°C from room temperature with a heating rate of 10°C/min,held for 30min,and then cooled to room

*To whom correspondence should be addressed.Tel:86-532-84022509.Fax:86-532-84022509.E-mail:kchen@qust.edu.cn.†

Qingdao University of Science and Technology.‡

Missouri State University.

J.Phys.Chem.C 2010,114,17358–17361

1735810.1021/jp104706q 2010American Chemical Society

Published on Web 09/28/2010

temperature.After the growth procedure,the substrates were coated with white ZnO nanostructures.A number of experiments were conducted with substrates located in different zones and in different atmospheres,such as in an air condition and water vapor.

Structural Characterizations and Electrical/Optical Mea-surements.The morphology and crystal structure of as-grown product were characterized with field emission scanning electron microscopy (FESEM,JEOL JSM-6700F)and transmission electron microscopy (TEM,JEOL JEM-2100F).The X-ray diffraction (XRD)data were collected on a D-MAX 2500/PC diffractometer.The photoluminescence (PL)measurements were performed on a Jobin Yvon LabRAM HR 800UV micro-Raman/PL system with an Andor DU420classic CCD detector under the excitation of a He -Cd laser (325nm).Bottom-gate ZnO nanostructure-based field-effect transistors (FETs)were fabri-cated by utilizing a highly doped Si substrate as a gate electrode and SiO 2with a thickness of 200nm as a gate dielectric.First,gold electrodes were deposited by a photolithography technique.The channel width (W )and length (L )were 2000and 50µm,respectively.ZnO nanoribbons were then synthesized by the evaporation and thermal oxidation process on silicon substrates with the patterned gold electrodes.FET characteristics were measured using a Keithley SCS 4200semiconductor charac-terization system.Results and Discussion

As shown in Figure 1a,b,the substrate is covered with a large quantity of ZnO nanoribbons.The morphologies of the ribbons are uniform,with a thickness of 20nm and length up to hundreds of nanometers;moreover,the width is tapered along the growth direction (Figure 1c -e).Figure 1d demonstrates ultrafine tips with a diameter of ∼10nm on each nanoribbon.Figure 1e shows a zigzag edge of the ribbon,which has been rarely reported up to now.Each nanostructure can be considered as a combination of a nanoribbon with a zigzag edge and a nanowire.A nanostructure of this type may exhibit unique current -voltage (I -V )characteristics for nanoelectronics.29To understand the effect of H 2O 2on the growth of zigzag structures,various experiments were performed in different atmospheres by keeping all other reaction parameters the same.As given in Figure 2,when water vapor or air was introduced instead of H 2O 2,flexuous wires and nanorods were obtained,respectively.The wires with rough surfaces (Figure 2a)are up to micrometers in length and submicrometers in diameter,which might be Zn/Zn suboxide;there are also some seedlike nanocrystals on the substrate (Figure S1,Supporting Information).The nanorods obtained in the air condition (Figure 2b)have a uniform diameter

of about 100nm.The XRD pattern (Figure S2,Supporting Information)demonstrates that the nanorods are wurtzite hexagonal phase ZnO (JCPDS 36-1451)and grow along the [0001]direction,which is consistent with other reports.301D nanostructures of zinc oxide are usually formed by one of the following two processes:the vapor -liquid -solid (VLS)mech-anism or the vapor -solid (VS)mechanism.31Metal catalysts were not used or detected,and thereby,the reaction in our experiment cannot be attributed to the VLS process.Though the VS mechanism is frequently cited for the formation of ZnO nanostructures,it is not suitable for our two-step process due to the low temperature.We proposed that the zinc seed film was first oxidized to form zinc oxides on the surface.Zinc atoms then diffuse into ZnO x and induce the growth of 1D nanostruc-tures through the migration of intrinsic defects.32The selection of oxidant and the diffusion rate of zinc are two dominating factors for the morphology of the nanostructures.Figures 1and 2demonstrate that H 2O 2plays a crucial role in the formation of exotic ZnO nanoribbons,and an oxidant can be used to tailor the growth of ZnO nanostructures with desired morphologies.Internal structures of the nanoribbons were studied through TEM characterizations.Figure 3a shows the basal portion of a nanoribbon (the nanowire on the tip was broken during the ultrasonic process for the TEM sample preparation),which is consistent with SEM observations.The typical zigzag shape is

more clearly shown through TEM imaging.Planes of (011

j 1),(011

j 2),and (011j 3)are designated by different colored arrows (black,red,and blue,respectively).A selected area electron diffraction (SAED)pattern with the incident electron beam along [21

j 1j 0]reveals that the top and bottom planes are (21j 1j 0)and the growth orientations are along [0001]and [011

j 0],which correspond to three favored growth directions of wurtzite-structured oxide,[0001],<011

j 0>,and <21j 1j 0>.33On the basis of the experimental results above and in combination with the crystal structure of wurtzite (Figure 3b),we propose that zigzag-shaped nanoribbons are surrounded by (0002),(011

j 0),(011j 1),(011

j 2),and (011j 3)and with (21j 1j 0)as the top and bottom planes.As a polar crystal,Zn and O atoms arrange alternatively along the c axis.34ZnO 1D nanostructures mostly grow along [0001]and have a hexagonal cross section.For zigzag ZnO nanostruc-tures here,the tapered width indicates different growth rates along two directions owing to the effect of water vapor during the growth process.Similar structures,such as Sb-doped ZnO nanobelts with single-sided zigzag boundaries,were achieved by Zhang et al.35They found that a certain concentration of Sb element results in the formation of a single-sided zigzag shape.In our case,without other elements,hydrogen peroxide decom-posed at a low temperature and released oxygen for the growth of ZnO nanostructures.Both Zn 2+and O 2-tend to absorb H 2O molecules.H 2O has been reported to have effects on impeding

the growth along [0001]and accelerating the <011

j 0>growth of ZnO.36,37Though growth kinetics need to be further inves-tigated,the formation of ZnO nanostructures indicates the important role of the hydrogen peroxide.

The surfaces of the ribbons are not as smooth as those of the 1D nanostructure prepared by the CVD method.There are nanoislands on both the top/bottom plane and edges with diameters of approximately 30nm,as shown in Figure 4.This growth phenomenon could be due to absorption and self-attraction of ZnO crystals.38These islands increase the surface area,thereby improving their functions as catalysts and sensors.To investigate optical properties of the nanostructures,photoluminescence (PL)spectra were measured with an excita-tion wavelength of 325nm at room temperature.As

presented

Figure 1.SEM images of zigzag ZnO nanoribbons with different magnifications.

Synthesis of Exotic Zigzag ZnO Nanoribbons J.Phys.Chem.C,Vol.114,No.41,201017359

in Figure 5,there are mainly two emission peaks for ZnO nanostructures with an ultraviolet (UV)emission at about 382nm and a green peak at 518nm.The UV peak could be generally attributed to the near-band-edge emission (NBE)and the visible band (known as deep level emission,DLE)is usually caused by impurities and structural defects.39In comparison to nano-wire-like structures formed at a lower temperature zone,the intensity of the UV emission of zigzag ZnO nanostructures increases dramatically,and the intensity of visible emission obviously decreases.The nanowire-like structures were obtained as the substrate was located about 13cm away from the center of the furnace (Figure S3,Supporting Information).The intensity ratios of the UV emission to the visible emission of the zigzag and nanowire-like nanostructures are 3.73and 0.31,respectively.A higher ratio indicates an improved crystallinity of the zigzag ZnO nanostructures and few ionized oxygen vacancies inside.40

Bottom-gate ZnO FETs were constructed on a Si/SiO 2substrate using P ++-Si,SiO 2,and Au as the gate electrode,gate dielectric,and source/drain electrodes,respectively (inset

of Figure 6a).The thickness of the ZnO semiconductor is about 100nm.Typical I d -V ds curves of the device fabricated in this manner are shown in Figure 6a.ZnO FETs demonstrated characteristics of a conventional transistor in both linear and saturation regimes with I ds increasing linearly with V ds at low drain voltages and saturation behavior at high drain voltages.As shown in Figure 6b,ZnO nanostructures exhibit a typical n-channel behavior with a threshold voltage (V th )of 16V.The saturation mobility and current on-to-off ratio from the transfer plot at a drain voltage (V ds )of 20V and gate voltages (V g )of -10to 40V were 0.063cm 2V -1s -1and 1×104,respectively.The electron mobility and threshold voltage are obtained from the following equation

where C i is the capacitance per unit area of the gate insulator (C i )17.1nF cm -2).The low mobility can be related to high contact resistance between ZnO nanoribbons and electrodes.41,42In comparison to ZnO films prepared by sputtering coating or spin-coating,the film used in this study consists of a large number of ZnO nanoribbons that could make a film of ZnO nanoribbions a promising material for applications in catalysts and sensors due to its large specific surface area.Low-temperature processing makes the fabrication of such a ZnO film on an indium tin oxide (ITO)substrate practical.Like ZnO nanorod arrays,ZnO nanoribbons will also become a very promising material as an electron-transport layer in dye-sensitized solar

cells.

Figure 2.SEM images of ZnO nanostructures obtained in (a)a water vapor condition and (b)an air

condition.

Figure 3.(a)TEM image and SAED pattern of a typical zigzag ribbon

with the incident electron beam along [21

j 1j 0].(b)Structural model of wurtzite-structured ZnO with (011

j 1),(011j 2),and (011j 3)planes

labeled.Figure 4.SEM image of ZnO

nanostructures.

Figure 5.Photoluminescence spectra of (a)nanowire-like ZnO

nanostructures and (b)zigzag ZnO nanostructures.

I ds )

(

C i µsat W

2L

)

(V gs -V th )2

17360J.Phys.Chem.C,Vol.114,No.41,2010Wang et al.

Conclusion

A novel method was investigated to synthesize exotic zigzag ZnO nanostructures at a low temperature of 500°C with the aid of hydrogen peroxide as an oxidant.Such a low growth temperature is compatible with very developed silicon technol-ogy.SEM and TEM characterizations show that the nanostruc-tures are a single crystal with a thickness of 20nm,a length up to hundreds of nanometers,and a width tapered along the growth direction.Optical and electrical measurements demonstrate that zigzag ZnO nanostructures should be a promising material for nanoscale optoelectronics,field-effect transistors,and solar cells.The novel method developed in this study can be used to synthesize other metal oxides with zigzag edges.

Acknowledgment.This work was financially supported by the Natural Science Foundation of Shandong Province (Grant No.2009ZRB01420).L.F.D.acknowledges financial support by the Taishan Scholar Overseas Distinguished Professorship program from the Shandong Province Government,People’s Republic of China.

Supporting Information Available:SEM images and XRD pattern of ZnO nanostructures.This material is available free of charge via the Internet at http://pubs.acs.org.References and Notes

(1)Sun,X.W.;Huang,J.Z.;Wang,J.X.;Xu,Z.Nano Lett.2008,8,1219–1223.

(2)Kwon,S.S.;Hong,W.K.;Jo,G.;Maeng,J.;Kim,T.W.;Song,S.;Lee,T.Ad V .Mater.2008,20,4557–4562.

(3)Cao,X.;Wang,N.;Wang,L.Nanotechnology 2010,21,065603.(4)Jang,E.S.;Won,J.H.;Hwang,S.J.;Choy,J.H.Ad V .Mater.2006,18,3309–3312.

(5)Zhou,J.;Gu,Y.D.;Fei,P.;Mai,W.J.;Gao,Y.F.;Yang,R.;Bao,G.;Wang,Z.L.Nano Lett.2008,8,3035–3040.

(6)Jun,J.H.;Park,B.;Cho,K.;Kim,S.Nanotechnology 2009,20,505201.

(7)Fragala,M.E.;Satrianob,C.;Malandrinoa,G.Chem.Commun.2009,839–841.

(8)Bacsa,R.R.;Dexpert-Ghys,J.;Verelst,M.;Falqui,A.;Machado,B.;Bacsa,W.S.;Chen,P.;Zakeeruddin,S.M.;Graetzel,M.;Serp,P.Ad V .Funct.Mater.2009,19,875–886.

(9)Wang,X.Y.;Tian,Z.P.;Yu,T.;Tian,H.M.;Zhang,J.Y.;Yuan,S.K.;Zhang,X.B.;Li,Z.S.;Zou,Z.G.Nanotechnology 2010,21,065703.(10)Cao,B.Q.;Cai,W.P.;Duan,G.T.;Li,Y.;Zhao,Q.;Yu,D.P.Nanotechnology 2005,16,2567–2574.

(11)Hu,P.A.;Liu,Y.Q.;Wang,X.B.;Fu,L.;Zhu,D.B.Chem.Commun.2003,1304–1305.

(12)Pan,Z.W.;Mahurin,S.M.;Dai,S.;Lowndes,D.H.Nano Lett.2005,5,723–727.

(13)Chou,T.P.;Zhang,Q.F.;Fryxell,G.E.;Cao,G.Z.Ad V .Mater.2007,19,2588–2592.

(14)Sun,T.J.;Qiu,J.S.;Liang,C.H.J.Phys.Chem.C 2008,112,715–721.

(15)Wang,Z.L.ACS Nano 2008,2,1987–1992.

(16)Wang,N.;Cai,Y.;Zhang,R.Q.Mater.Sci.Eng.,R 2008,60,1–51.

(17)Umar,A.;Karunagaran,B.;Kim,S.H.;Suh,E.K.;Hahn,Y.B.Inorg.Chem.2008,47,4088–4094.

(18)Chen,L.Y.;Wu,S.H.;Yin,Y.T.J.Phys.Chem.C 2009,113,21572–21576.

(19)Zhang,Z.H.;Guo,W.L.Appl.Phys.Lett.2009,95,023107.(20)Kan,E.J.;Li,Z.Y.;Yang,J.L.;Hou,J.G.J.Am.Chem.Soc.2008,130,4224–4225.

(21)Duan,J.H.;Yang,S.G.;Liu,H.W.;Gong,J.F.;Huang,H.B.;Zhao,X.N.;Zhang,R.;Du,Y.W.J.Am.Chem.Soc.2005,127,6180–6186.

(22)Barcaro,G.;Sedona,F.;Fortunelli,A.;Granozzi,G.J.Phys.Chem.C 2007,111,6095–6102.

(23)Lou,P.;Lee,J.Y.J.Phys.Chem.C 2009,113,21213–21217.(24)Botello-Mendez,A.R.;Lopez-Urıias,F.;Terrones,M.;Terrones,H.Nano Lett.2008,8,1562–1565.

(25)Wei,D.P.;Ma,Y.;Pan,H.Y.;Chen,Q.J.Phys.Chem.C 2008,112,8594–8599.

(26)Kuo,T.J.;Lin,C.N.;Kuo,C.L.;Huang,M.H.Chem.Mater.2007,19,5143–5147.

(27)Sun,S.H.;Meng,G.W.;Zhang,G.X.;Zhang,L.D.Cryst.Growth Des.2007,7,1988–1991.

(28)Zhang,Y.;Xu,J.Q.;Xiang,Q.;Li,H.;Pan,Q.Y.;Xu,P.C.J.Phys.Chem.C 2009,113,3430–3435.

(29)Zhan,J.H.;Bando,Y.;Hu,J.Q.;Golberg,D.;Kurashima,K.Small 2006,2,62–65.

(30)Liu,F.;Cao,P.J.;Zhang,H.R.;Shen,C.M.;Wang,Z.;Li,J.Q.;Gao,H.J.J.Cryst.Growth 2005,274,126–131.

(31)Kar,S.;Pal,B.N.;Chaudhuri,S.;Chakravorty,D.J.Phys.Chem.B 2006,110,4605–4611.

(32)Danielewski,M.;Filipek,R.;Kozubski,R.;Kucza,W.;Zieba,P.;Zurek,Z.Diffus.Defect Data,Pt.A 2005,237-240,163–168.

(33)He,J.H.;Ho,C.H.;Wang,C.W.;Ding,Y.;Chen,L.J.;Wang,Z.L.Cryst.Growth Des.2009,9,17–19.

(34)Shen,J.B.;Zhuang,H.Z.;Wang,D.X.;Xue,C.S.;Liu,H.Cryst.Growth Des.2009,9,2187–2190.

(35)Yang,Y.;Qi,J.J.;Liao,Q.L.;Zhang,Y.;Tang,L.D.;Qin,Z.J.Phys.Chem.C 2008,112,17916–17919.

(36)Ali,M.;Winterer,M.Chem.Mater.2010,22,85–91.

(37)Wang,H.H.;Xie,C.S.;Zeng,D.W.J.Cryst.Growth 2005,277,372–377.

(38)Han,X.H.;Wang,G.Z.;Zhou,L.;Hou,J.G.Chem.Commun.2006,212–214.

(39)Khranovskyy,V.;Yazdi,G.R.;Lashkarev,G.;Ulyashin,A.;Yakimova,R.Phys.Status Solidi A 2008,205,144–149.

(40)Liu,Y.C.;Xu,H.Y.;Mu,R.;Henderson,D.O.;Lu,Y.M.;Zhang,J.Y.;Shen,D.Z.;Fan,X.W.;White,C.W.Appl.Phys.Lett.2003,83,1210–1212.

(41)Schneider,J.J.;Hoffmann,R. C.;Engstler,J.;Soffke,O.;Jaegermann,W.;Issanin,A.;Klyszcz,A.Ad V .Mater.2008,20,3383–3387.

(42)Choi,J.H.;Kar,J.P.;Khang,D.Y.;Myoung,J.M.J.Phys.Chem.C 2009,113,5010–5013.

JP104706Q

Figure 6.(a)Output characteristics and (b)transfer characteristics of a ZnO-nanoribbon-based field-effect transistor.

Synthesis of Exotic Zigzag ZnO Nanoribbons J.Phys.Chem.C,Vol.114,No.41,201017361