HowtomanageipaddressesandsubnetswithphpIPAM_MySQL

One way to manage IP address allocations more systematically is using a web based IP address management tool. Not only can the web based tool be accessed from anywhere, but a backend database also ensures that all updates to the database are properly synchronized and applied in real time. While there are many web applications available, we will be focusing on setting upphpIPAM(IP Address Manager) in this tutorial. phpIPAM is an open source, efficient IP address management application with the following features.

The demo site for phpIPAM is available athttp://demo.phpipam.net.

In this tutorial, we will besetting up phpIPAM along with Apache web server in theUbuntuenvironment.

Installing phpIPAM on Ubuntu

First of all, install required packages usingapt-get.

# apt-get install apache2 mysql-server php5 php5-gmp php-pear php5-mysql php5-ldap wget

If MySQL has been installed for the first time, please set the root password using the following command.

# mysqladmin -u root password NEWPASSWORD

phpIPAM can be set up with any web server directory. We will set it up in the /phpipam/ sub directory under the root directory of Apache web server.

Download phpIPAM package.

# wget http://kent.dl.sourceforge.net/project/phpipam/phpipam-1.0.tar

Extract the package into the web server directory.

# cp phpipam-1.0.tar /var/www/
# cp /var/www/
# tar xvf phpipam-1.0.tar
# rm phpipam-1.0.tar

Now, specify the MySQL username and password, as well as its base directory.

# vim /var/www/phpipam/config.php

$db['host'] = "localhost";## MySQL user for ipam ##$db['user'] = "phpipam";## password for the MySQL user ##$db['pass'] = "phpipamadmin";## database for MySQL ##$db['name'] = "phpipam";## base directory ##define('BASE', "/phpipam/");

The base directory needs to be defined in the provided .htaccess file.

# vim /var/www/phpipam/.htaccess

RewriteBase /phpipam/

Preparing Apache Web Server

phpIPAM needs therewritemodule for operation. The module can be enabled in an Ubuntu or Debian machine usinga2enmodcommand as follows.

# a2enmod rewrite

Next, Apache's default configuration needs to be changed as well. Please add/modify your configuration to look like the one below.

# vim /etc/apache2/sites-enabled/000-default

Options Indexes FollowSymLinks MultiViewsAllowOverride allOrder allow,denyallow from all

Finally, restart Apache web service.

# service apache2 restart

Finalizing Installation

We can finalize the installation of phpIPAM by using the web browser. Pointing the browser to the URL: http:///phpIPAM will show the following phpIPAM installation page. We can proceed to automatic database installation.

Now phpIPAM should be up and running. We can login using the following default credentials.

Manage IP Addresses with phpIPAM

In the rest of the tutorial, we will walk you through how to manage subnets and IP addresses with phpIPAM.

Creating a section

Let us start by adding a section for our network. Click on Administration > Sections.

Click on "Add Section". Now we can name our section as we want it to be displayed. Fill in the details of the section.

Creating a subnet

Next, we add a new subnet 172.16.1.0/24 under the section 'Our Network'. Click on Our Network > Add Subnet

Now we can easily add IP addresses in the subnet. One method of adding IP addresses is to add them one by one. phpIPAM provides an alternative method to scan all the hosts and add them automatically without much hassle. It can scan the local subnet located in the same broadcast domain, as well as remote subnets reachable through routing. After selecting a subnet, click on 'scan subnet for new hosts' to scan IP addresses as shown below.

After the scan is performed, the discovered IP addresses can be added into the database by clicking the 'Add discovered hosts' button at the bottom.

Creating an IPv6 subnet

IPv6 subnets can also be created in a similar process. We specify the IPv6 network as showed in the screenshot.

All the tools available for IPv4 can be used for IPv6 as well.

Creating a nested subnet

phpIPAM also provides the option of creating nested subnets for both IPv4 and IPv6. For example, we will be dividing our IP block 172.16.1.0/24 into 4 smaller subnets (/26), each for a specific department within the organization. After selecting the /24 subnet, we can create a nested subnet using the 'Add a new nested subnet' button. The screenshot below shows the icon for adding a nested subnet.

After all the subnets have been created, we should have similar output. Following is a nested subnet preview window.

Adding users and groups

First, we will create a group with READ/WRITE permission to the section 'Our network'. This can be done by selecting Administration > Groups > Create Group.

Now that the group has been created, we modify section permission by selecting Administration > Sections, and then editing the section.

We will create a user named 'user1'. We will add the user to the group 'Demonstration group' so that it inherits all necessary permissions from the group. We start by clicking on Administration > Users > Create user.

Now we can log in as this user and add/modify IP addresses under the section 'Our network'.

To sum up, phpIPAM is a versatile IP address management tool that can be used for both IPv4 and IPv6. This tutorial focused on the basics that can help you get started. Be sure to test with all the available features like using IP address calculator, adding devices, VLANs and VRFs, and import/export using xls.

Hope this helps.

Subscribe to Xmodulo

Do you want to receiveLinux FAQs, detailed tutorials and tipspublished at Xmodulo? Enter your email address below, and we will deliver our Linux posts straight to your email box, for free. Delivery powered by Google Feedburner.